Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Anleitung Zusammenfassung
Failure to do so may damage your iPhone/iPod. 1. While your iPhone/iPod is docked in the unit and the unit is connected to AC power, it recharges (until fully charged). The iP11 will not overcharge your iPhone/iPod. Note that non-docking iPods will NOT charge. Listening to your iPhone/iPod 1. Dock the already playing iPhone/iPod. The iP11 will automatically turn on and you will hear the music playing from your iPhone/iPod. The iPhone/iPod Icon will appear at the right lower corner the display, indicating iPhone/iPod playing mode. For enhanced bass, slide the . EXB Expanded Bass Switch located on the back of the unit to the ON position. Note: If the playing song/music loudness is too low on the iPhone/iPod itself, the iP11 may not detect that the iPhone/iPod is in play mode. Press the . iPhone/iPod Play/Pause Button on the iP11 twice to play it. 2. When the iPhone/iPod is docked and in standby mode, press the . iPhone/iPod Play/Pause Button on the iP11 to play it. The iPhone/iPod Icon will appear at the right lower corner the display, indicating iPhone/iPod playing mode. 3. Press the . iPhone/iPod Play/Pause Button again to pause play; press again to resume it. 4. Press the . Volume + and . Volume – Button on the iP11 to adjust the system volume. 5. To turn the iP11 OFF, press the . Alarm Reset/Power Off Button. Your iPhone/iPod will continue charging while in the dock. Listening to other portable audio devices If you are using an iPod without a docking port or other MP3 player or portable audio device, you can still play it through the iP11 via the . Line-in Jack. 1. Plug one end of an audio patch cord (available at into the headphone or line-out jack on your device and the other end of the patch cord into the iP11 . Line-in Jack, located on the back of the unit. 2. Press the . iPhone/iPod Play/Pause Button on the iP11 to turn the unit on. The iPhone/iPod Icon will appear at the lower right corner the display, indicating Line-in playing mode. 3. Turn on and play your device. 4. Press the . Volume + and . Volume – Button on the iP11 to adjust the system volume. You may need to adjust your device volume, too. 5. To turn othe iP11 OFF, press the . Alarm Reset/Power Off Button on the iP11. Please remember to turn off your device, too. 5 Alarm Operation Alarm Operation The iP11 Home System for iPhone/iPod features “Sure Alarm”. If a power failure occurs or the AC adaptor is accidentally disconnected, the unit will change to buzzer alarm to wake you up (provided you have installed backup battery). This unit also features Gentle Waking, which gradually increases the volume of whatever alarm you set. NOTE: TO WAKE TO iPhone/iPod, YOUR iPhone/iPod MUST BE PROPERLY DOCKED AND OFF (NOT IN PLAY MODE) OR NO ALARM WILL SOUND. You CANNOT wake to Line in audio devices. Setting the Alarm Time 1. Press and hold the . Alarm Set Button for 2 seconds until the display flashes. Press the . Hour Set Button until the desired alarm hour is displayed. Next, press the . Sleep/Minute Set Button to set the desired alarm minute. Remember to set the correct AM or PM if you are using 12 hour clock format. 2. Press the . Alarm Set Button again to exit the setting mode. You should hear 2 beeps indicating the alarm is set. Note: Once you set the alarm time, the alarm will be automatically armed, indicated by the Alarm Icon. To disarm the alarm, press the . Alarm Set Button. The Alarm Icon will disappear and the alarm will not sound at the set time. Note: Make sure to adjust volume level for comfortable wake up volume 4. When the alarm is sounding, the Alarm Icon will flash. • To snooze during the alarm, press the . Snooze/Dimmer Button. The alarm will be silenced for 9 minutes, then come on again. • To turn the alarm off, press the . Alarm Reset/Power Off Button. The alarm will come on again the next day at the same time. 5. If the alarm is not turned off after it sounds, it will play for approximately one hour then turn off automatically. This cycle will repeat every 24 hours unless the controls are changed. Note: Please make sure your iPhone/iPod has enough songs to play for one hour, otherwise please set the iPhone/iPod repeat mode to ON. Note: If there is no iPhone/iPod present or there is no music detected on the iPhone/iPod at alarm time, the iP11 will automatically switch to buzzer alarm. 6 Sleep Operation Sleep Operation 1. When the iP11 is off or while listening to your iPhone/iPod, press the . Sleep/Minute Set Button to enter sleep mode. The Sleep Icon will appear on the display to indicate it is in sleep mode. Sleep mode has a Gentle Sleep feature which gradually lowers the volume before it shuts off. 2. You can adjust the sleep timer from 90, 60, 30 or 15 minutes by pressing the . Sleep/Minute Set Button again.The unit will automatically turn off after the selected time. 3. When the display changes back to show the real time, pressing the . Sleep/Minute Set Button once will show the sleep time remaining. Press...
Dieses Handbuch ist für folgende Modelle:Radios - iP11 (255.55 kb)