Stimmen - 7, Durchschnittliche Bewertung: 3.9
(
)
)
|
Anleitung Zusammenfassung
You will not have to switch off the clock radio yourself as this will take place automatically after 59 minutes. ALARM ON SLUMBER ON The clock radio can awaken you in 2 ways: Wake by radio '• Make sure the volume of the radio is loud enough to wake you. • Set ALARM switch © to RAD. • You will be awakened at the set alarm time by the radio. Wake by buzzer • Set ALARM switch © to BUZ. • At the set alarm time you will be awakened by the buzzer ALARM OFF You can switch off the alarm in 3 ways: Switching off the alarm for 9 minutes • Press the REPEAT ALARM button ©. With this switch you temporarily switch off the alarm. After nine minutes the alarm (radio or buzzer) will sound again. If you press the REPEAT ALARM button d) again, the same will happen. If the REPEAT ALARM button © is not pressed again, the alarm will switch itself off after 1 hour and 59 minutes. The following day the alarm signal will sound again at the set alarm time. The time you listen to the radio before you fall asleep is called the slumber time. The slumber time is 59 minutes. If you wish to slumber, carry out the following: • Make sure the TIME SET switch © is set to RUN. • Press the SLUMBER button ©. The display will show that you have a slumber time of 59 minutes. SLUMBER OFF You can switch off the radio before the slumber time has elapsed: • Press the SLUMBER OFF/REPEAT ALARM button © and the radio is switched off. - If the TIME SET switch © is in position TIME or ALARM, the slumber function will not work. - The slumber function does not affect the alarm. Switching off the alarm for 24 hours • Press the ALARM RESET button ©. The alarm is now switched,off for 24 hours and will sound again the next day at the same time. Switching off the alarm completely • Set the ALARM switch © to OFF. In the display the ALARM indicator will disappear and the alarm is now switched off. If you wish to be awakened the following day again, you must reset the ALARM switch © to RAD or BUZ before going asleep. 5 Additional POWER FAILURE MAINTENANCE - As soon as a power failure occurs, the complete clock radio will be switched off. - As soon as the power supply returns, the numbers on the display start to flash. This indicates that you must set the correct time on the clock. - You can insert a 9 Volts pack battery (type 6F22) in the clock radio. Should there be a power failure, the clock will continue to function. You will not see this, however,— because the battery does not illuminate the clock display. As soon as the power is switched on again, the display will indicate the correct time. For clarity: Alarm, radio and display do not work on battery. • Before inserting the battery, connect the power plug to the wall outlet. • Place the battery in the compartment on the base of the clock radio - Replace.the battery once a year. It is not possible to say precisely how long the battery will last. The battery life time depends on how often and for how long the power supply fails. This varies according to country and region. - If you do not intend to use the clock radio for a long time, it is better to remove the plug from the wall socket. In addition to this, it is advisable to remove the battery from the clock radio. This will prevent any danger of leakage and the clock radio will not be damaged. - Fingerprints, dust and dirt on the clock radio should be removed using a clean and damp soft cloth or chamois leather. When cleaning do not use any products wich contain abrasive agents or solvents (benzine, thinner, alcohol etc.). These might affect the housing. - Rain, dampness and extreme heat may damage the clock radio. For this reason it should not be placed in full sun or close to heating elements for any period of time. This product complies with the radio interference requirements of the European Community The type-plate is located on the base of the set. IMPORTANT NOTES FOR USERS IN THE U.K. Mains plug This apparatus is fitted with an approved moulded 13 Amp plug. To change a fuse in this type of plug proceed as follows: • Remove fuse cover and fuse. • Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type. • Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note: The severed plug must be disposed to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. How to connect a plug The wires in the mains lead are coloured with the following code: blue = neutral IN), brown = live (L). As these colours may not correspond with the colour markings identifying the terminals'in your plug, proceed as follows: • Connect the blue wire to the terminal marked N or coloured blue or black. • Connect the brown w...
Dieses Handbuch ist für folgende Modelle:Armbanduhren - AJ3150/20 (281.41 kb)
Armbanduhren - AJ3150/00 (281.41 kb)