Stimmen - 2, Durchschnittliche Bewertung: 3 ( )

Hersteller: Allstar Products Group Dateigröße: 468.12 kb Dateiname: a5e081e0-728a-462e-b27b-ea4dfc56370a.pdf Unterrichtssprache:

Put the transmitter in program mode. controlled devices such as a garage door opener, 2. Select the button you wish to use. with a single transmitter. 3. Enter your 9 digit code. Follow these simple instructions. Please read the instructions completely before starting. Further instructions are available at INSTRUCTIONS FOR REPLACEMENT TRANSMITTERS Select the block of switches below that best matches the one in the transmitter or receiver that you are replacing. *The grids display an EXAMPLE using the code shown on the switches to the left. 1 2 3 4 5 6 7 8 9 - - 0 0 + + - 0 + turn page Go to Step 1... 9 switches w/ + 0 - 1 2 3 4 5 6 7 8 9 - - + + - - + + - 1 2 3 4 5 6 7 8 9 - - + + - - + + - OR turn page Go to Step 1a 9 switches w/ On & Off 1 2 3 4 5 6 7 8 9 - - 0 0 + + - 0 + turn page Go to Step 1... 8 switches w/ + 0 - WARNING Disconnect power to operator before any installation or repair. Follow all instructions provided by the manufacturer of your operator. After installing your receiver and transmitter, check the operation of your radio controls by moving approximately 45 feet back from the garage door, then press the transmitter button. Operation at this distance should be reliable. However, environmental conditions and the location of the transmitter and receiver will affect distance. • If the transmitter doesn’t activate the operator check the coding on both the transmitter and receiver. The code setting must match exactly . • If the distance is inadequate check the battery and replace if necessary. • To maximize the operating distance move the transmitter to different locations in the car until a satisfactory distance is achieved. Vanity mirrors on sun visors will affect performance. • If the receiver is in the proximity of a metal beam or other obstruction it may be necessary to relocate the receiver to increase the operating range. • If multiple receivers are mounted closer than 15 feet, blocking and interference may occur. Move the receivers further apart. • If system does not work at any distance, check that the receiver terminals are connected to the proper operator terminals. • If the HomeLink ® transmitter does not activate the operator or distance is inadequate, verify proper operation using the hand-held transmitter. Contact your HomeLink ® system provider for help with configuring the HomeLink ® transmitter and to resolve distance problems when using the HomeLink ® system. Manufacturer’s Limited Warranty Allstar warrants its radio controls to be free from defect in material and workmanship for a period of one ( 1) year from the date of purchase. To obtain service, contact your dealer. To obtain service under this warranty the buyer must obtain authorization instructions for the return of any goods from Allstar before returning the goods. The goods must be returned with complete identification, with copy of proof-of- purchase, freight prepaid and in accordance with Allstar’s instructions or they will not be ac...

Herunterladen

Geben Sie zwei Ziffern: