Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. "WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL." WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN PRECAUTION Follow the advice below for safe and appropriate operation. ON PLACEMENT • Do not use the unit in places which are extremely hot, cold, dusty, or humid. • Place the unit on a flat and even surface. • Do not restrict the air flow through the ventilation slots by placing the unit on soft furnishings, by covering the unit with a piece of cloth or by placing the unit on a carpet. ON AC VOLTAGE • Before using, check that the rated voltage of your unit matches your local voltage. ON SAFETY • When connecting and disconnecting the AC cord, grip the plug instead of the cord itself. Pulling the cord may damage it and create hazard. • When you are not going to use the unit for a long period of time, disconnect the AC power cord. FCC INFORMATION (FOR USA ONLY) This device complies with Part 15 of FCC Rules. Operations are subject to the following two conditions: (1) This device may not causeharmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operations. Should any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel. 1. SET/MEMORY Knob 10. ALARM2 Knob 2. POWER (ON/OFF) Knob 11. H...TIME SET...M3. BAND Knob (Hour/Minute) 4. SNOOZE Knob /TUNING Control 5. BUZZER/RADIO Switch 12. SLEEP Knob 6. PRESET (+) Knob 13. DIMMER Knob 7. PRESET (-) Knob 14. ALARM1 Knob 8. DISPLAY 15. RESET Knob 9. COLORS Knob 16. VOLUME Control 3 CLOCK SETTING • The clock display and adjustment must be in radio off. 1. Connect AC power, the clock digital will indicate on screen. • Check that the rated voltage of your unit matches your local voltage. 2. Press “SET/MEMORY” knob, the clock digital will flash. 3. Press “ H...TIME SET...M/TUNING ” knob to adjust the Hour/Minute. • When “ ” appears, it comes to set noontime. 4. Press “ MEMORY ” knob to store. DIMMER FUNCTION • Press “DIMMER” knob to change the LCD display brightness. • Press “COLORS” knob to repeatly select the multi-color display changed cyclically as below. 2 4 5 7 6 8 SLEEP TIMER SETTING SPECIFICATION DUAL ALARM SETTING SLEEP TIMER SETTING RADIO RECEPTION VOLUME ADJUSTMENT Adjust the VOLUME control to obtain the desired volume level before using the unit. SELECT BAND 1. Press “POWER ON/OFF” knob to turn on radio. 2. Press “BAND” knob to repeatly select FM or AM, the band changed shown in display. 3. Press “ H...TIME SET...M / TUNING” knob to select the desired station. PRESET CHANNEL 1. Press “MEMORY” knob until “MEMORY” flashes on screen. 2. Press “PRESET +” knob to increase channel, press “PRESET -” knob to decrease channel. 3. Press “MEMORY” knob to store. FM: Extend the FM wire antenna full...
Dieses Handbuch ist für folgende Modelle:Radios - CR-308 (224.24 kb)