Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
The instructions for adjusting the Daylight Saving starting and ending dates will be found on a separate addendum sheet included with this Instruction Manual. 9 CKS3015_010406.p65 9 4/1/2006, 16:34 Manual Time Adjustments Some people like to set their clocks 5 to 10 minutes fast to make sure that they will always be on time. Even though the SmartSet® sets the time by itself, you still have the option of adjusting the time manually if you wish. To manually adjust the time display depress and hold the TIME button, and press either the SET (Up) or (Down) buttons to adjust the time display ahead or back as desired. Each press of the SET (Up) or (Down) buttons will change the display by one minute. If you hold the SET (Up) or (Down) buttons the display will continue to change. The display will change slowly at first, one minute at a time. But if you continue holding the SET (Up) or (Down) buttons the display will change rapidly. Note: If you manually adjust the time, your new setting is entered into the SmartSet® memory. If the power is interrupted, the display will return to your new setting, not the original setting, when the power is restored. 10 CKS3015_010406.p65 10 4/1/2006, 16:34 Adjusting The Wake Up Times Your SmartSet® clock radio has two separate alarms that can be set and used independently. You may use the alarms to wake two people at different times, or you may use one alarm for weekdays and the other for weekend wake up times. The procedure for adjusting the wake up time is the same for both Alarm 1 and Alarm 2. 1.) Depress and hold either the ALARM 1 or ALARM 2 setting button. The respective Alarm 1 or Alarm 2 time, and “DAY OF WEEK” indicators will appear. 2.) While holding the ALARM 1 or ALARM 2 setting button, depress either the SET (Up) or (Down) button to move the alarm display ahead or back to your respective Alarm 1 or Alarm 2 desired wake up time. 3.) When the desired wake up time appears on the display, release the SET (Up) or (Down) buttons. NOTE: Be sure that you have set the wake up time correctly by observing the AM indicator for each alarm. If the AM indicator is ‘On’the wake up time is “AM”. If the AM indicator is ‘Off’, the wake up time is “PM”. AM indicators 4.) When the desired wake up time (AM or PM) appears on the display, release the ALARM 1 or ALARM 2 setting buttons. 11 CKS3015_010406.p65 11 4/1/2006, 16:34 Selecting The Alarm Mode Your SmartSet® clock radio allows you to select from among three different alarm operation modes for either alarm. The alarm modes are: • Everyday – the alarm will turn on all 7 days. • Weekdays only – the alarm will only turn on Monday through Friday; • Weekends only – the alarm will only turn on Saturday and Sunday; To check the Alarm Mode setting for Alarm 1, depress the ALARM 1 setting button. The ALARM 1 display will show the Alarm 1 wake up time and the day of the week indicators will show you the alarm mode which is selected. • If all 7 indicators are ‘On’, the Everyday mode is selected. • If only the Monday through Friday indicators are ‘On’, the Weekdays only mode is selected. • If only the Saturday and Sunday indicators are ‘On’, the Weekends only mode is selected. To change the Alarm Mode setting for Alarm 1, hold the ALARM 1 setting button and press the ALARM MODE button until the day indicators show the desired mode setting, Weekdays only, Weekends only, or Everyday operation. Release the ALARM MODE and ALARM 1 setting buttons and the display will return to the correct Day. Follow the same procedure to select the desired Alarm Mode for Alarm 2 if necessary. Checking The Wake Up Times And Alarm Mode Whenever you want to check the wake up time or the alarm mode settings, simply press either the ALARM 1 or ALARM 2 setting buttons. The respective Alarm display will show the wake up time and the day indicators will show you the alarm mode which is currently selected. Release the ALARM 1 or ALARM 2 setting buttons to return to correct Day. 12 CKS3015_010406.p65 12 4/1/2006, 16:34 13 Listening To The Radio 1.) Set the BAND selector to the desired band, AM or FM. 2.) Set the VOLUME control to a low setting. 3.) Press the RADIO ON/OFF button to turn the radio ‘On’. The radio dial pointer will light. 4.) Select your desired station with the TUNING control. 5.) Adjust the VOLUME control to the desired setting. 6.) When you are finished listening, press the RADIO ON/OFF button to turn the radio ‘Off’. The radio dial pointer light goes off. Antenna Information AM – The AM bar antenna is inside the cabinet. If AM reception is weak, change the position of cabinet until the internal antenna picks up the strongest signal. FM – The FM antenna is built in to the AC power cord. If FM reception is weak try varying the position and direction of the power cord until you find the strongest signal. CKS3015_010406.p65 13 4/1/2006, 16:34 Wake To RADIO 1.) Turn the radio ‘On’and select the Band, Station, and Volume level that you wish to hear when the alarm com...