Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
WARNING This product cannot replace responsible adult supervision. CAUTION 2 Consumer Information • For proper setup and use, please read these instructions. • Please keep this instruction sheet for future reference, as it contains important information. • Transmitter operates on AC current (use enclosed AC adaptor). • Receiver operates on AC current (use enclosed AC adaptors) or DC current (three “AAA” LR03 alkaline batteries, not included). • Adult assembly is required. • Tool needed for receiver battery installation: Phillips screwdriver (not included). • This product is not intended to be used as a medical monitor and its use should not replace adult supervision. • Test sound reception of receiver before first-time use and whenever you change location of the transmitter. • To prevent entanglement: -Never place transmitter in a crib/cot or playpen. Keep transmitter and receiver out of baby’s reach. -Never use extension cords with the AC adaptors. • Adults Note: Periodically examine the AC adaptors for damage to the cord, housing or other parts that may result in the risk of fi re, electric shock or injury. If an AC adaptor is damaged, do not use it. • Never use transmitter or receiver near water (i.e. bathtub, sink, wet basement, etc.). • Always use the transmitter and receiver where there is adequate ventilation. To prevent overheating, keep the transmitter and receiver away from heat sources such as radiators, heat registers, direct sunlight, stoves, amplifi ers, or other appliances which produce heat. • Do not connect the transmitter or the receiver (if AC adaptor is used) to more than the recommended number of power supplies. • The AC adaptor is not a toy. • Disconnect the AC adaptor from the receiver before cleaning. • Fisher-Price® does not recommend the use of two monitors in one house. • Always remember that you are using public airwaves when using your monitor. Conversations, even from rooms near your transmitter, may broadcast to other nursery monitors, radios, cordless telephones or scanners outside your home. To protect the privacy of your home, always turn off the transmitter when not in use. • The receiver (parent) unit may generate a tone when there is radio interference present in the location of operation whilst monitoring. The unit will resume to normal when the interference stops. • Field Strength: 74.6dBuV/m at 3m • Carrier Frequency 40 MHz • Product features and decoration may vary from photos. AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312. NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland. 3 Features Back View Receiver Transmitter 1 3 4 9 10 2 12 11 13 8 7 6 5 Features Back View Receiver Transmitter 1 3 4 9 10 2 12 11 13 8 7 6 5 4 Features Power Button Nightlight – press to turn on a soft glow. Channel Switch Microphone Power/Volume Dial Power L.E.D. Sound Lights (on front and back of receiver) – watch the light to see baby’s sounds. Range Indicator – flashing light indicates the receiver is out of range. Low Battery Indicator – flashing light indicates batteries need to be replaced or use the AC adaptor. Channel Switch Speaker Night Light Timer Switch - use timer to automatically shut off the night light after 30 minutes. Clip (backside of receiver) -Fasten to your clothes to stay in touch with baby around the house or yard. 5 • Fit each antenna into the socket in the receiver and the transmitter. Turn the antennas to secure AntennaAntenna AntennaAntenna • Fit each antenna into the socket in the receiver and the transmitter. Turn the antennas to secure AntennaAntenna AntennaAntenna Assembly in place. IMPORTANT! This product is designed to operate properly with the antennas provided. To reduce the chance of potential radio interference to other users, assemble and use only the antennas provided. Care • Excess dirt in the transmitter microphone will hamper transmission of sound. Clean the outer surface of the transmitter and the receiver with a cloth lightly dampened with a mild cleaning solution. • Never immerse the transmitter, receiver or AC adaptor. Fisher Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. ©2010 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA V4340pr-0729 6 • Locate the battery compartment door on the back of the receiver. Receiver Battery Installation (Optional) 1,5V x 3 “AAA” (LR03) 1,5V x 3 “AAA” (LR03) • Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door. • Insert three “AAA” (LR03) alkaline batteries into the battery compartment. Hint: We recommend using alkaline batteries for longer battery life. • Replace the battery compartment door. Tighten the screw with a Phillips screwdriver. Do not over-tighten. • Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your ...