Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
CAUTION This product cannot replace responsible adult supervision. 2 IMPORTANT! • For proper setup and use, please read these instructions. • Please keep this instruction sheet for future reference, as it contains important information. • Transmitter operates on AC current (use enclosed AC adaptor) or DC current (four “AAA” batteries, included). • Receiver operates on AC current (use enclosed AC adaptor) or DC current (three “AAA” LR03 alkaline batteries, not included). Note: A plastic tab is attached to the transmitter for in-store demonstration purposes. While the tab may have already been removed, check the transmitter to be sure. If the plastic tab is still attached, pull and remove the tab from the transmitter. Throw the plastic tab away. • Adult setup is required. • Tool needed for battery installation: Phillips screwdriver (not included). • This product is not intended to be used as a medical monitor and its use should not replace adult supervision. • Test sound reception of receiver before fi rst-time use and whenever you change location of the transmitter. • To prevent entanglement: -Never place transmitter in a crib or playpen. Keep transmitter and receiver out of baby’s reach. -Never use extension cords with the AC adaptors. • Adults Note: Periodically examine the AC adaptors for damage to the cord, housing or other parts that may result in the risk of fi re, electric shock or injury. If an AC adaptor is damaged, do not use it. • Never use transmitter or receiver near water (i.e. bathtub, sink, wet basement, etc.). • Always use the transmitter and receiver where there is adequate ventilation. To prevent overheating, keep the transmitter and receiver away from heat sources such as radiators, heat registers, direct sunlight, fi re, stoves amplifi ers, or other appliances which produce heat. • Do not connect the transmitter or the receiver (if AC adaptor is used) to more than the recommended number of power supplies. • An AC adaptor is not a toy. • Disconnect the AC adaptor from the transmitter and receiver before cleaning. • Fisher-Price® does not recommend the use of two monitors in one house. • Always remember that you are using public airwaves when using your monitor. Conversations, even from rooms near your transmitter, may broadcast to other nursery monitors, radios, cordless telephones or scanners outside your home. To protect the privacy of your home, always turn off the transmitter when not in use. • Carrier Frequency - 900 MHz • Product features and decoration may vary from photographs. 3 Fisher Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. ©2010 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA T4839a-0920 Features 5 1 2 3 4 Transmitter 8 7 10 11 12Receiver 149 BACK VIEW SIDE VIEW 65 13 Features Nightlight Button – Press to turn on a soft glow. Nightlights Power Button and L.E.D. Microphone Nightlight Timer Switch - Turn on for 30 minutes of light. Channel Switch - Choose from four different channels. Power/Volume Dial Power L.E.D. and Range Indicator - Lights when receiver power is ON; flashes (and you’ll hear a tone too) when the receiver is out of range of transmitter. Sound Lights – Watch these lights to see baby’s sounds. 12345678910 Start/Stop Button - Press the button to start the nap timer; press the button again to stop the nap timer. Press and hold the button to set the clock time. 11 Reset Button - Press and hold the button to reset the nap timer. Use this button in clock set mode to make selections. 12 LCD Screen 13 Channel Switch - Choose from four different channels. 14 Clip - (backside of receiver) -Fasten to your clothes to stay in touch with baby around the house or yard. 6 Receiver Battery Installation (Optional) • Locate the battery compartment door on the back of each receiver. • Loosen the screw in each battery compartment door with a Phillips screwdriver. Remove each battery Hint: We recommend using alkaline batteries for longer battery life. 1,5V x 3 “AAA” (LR03) compartment door. • Insert three “AAA” (LR03) alkaline batteries into each battery compartment. • Replace each battery compartment door. Tighten the screw with a Phillips screwdriver. Do not over-tighten. 7 Transmitter Battery Replacement 1,5V x 4 “AAA” (LR03) For best performance, we recommend replacing the batteries that came with the transmitter with four, new “AAA” (LR03) alkaline batteries. • Locate the battery compartment door on the bottom of the transmitter. • Loosen the screws in the battery compartment door. Remove the door. • Insert four “AAA” (LR03) alkaline batteries into the battery compartment. • Replace the battery compartment door and tighten the screws. Hint: You can also use the included AC adaptor to power the transmitter. Battery Safety Information In exceptional circumstances, batteries may leak fl uids that can cause a chemical burn injury or ruin your product. To avoid battery leakage: • Do not mix old and n...