Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
Transmitter is electrically powered. Remote control receiver is powered by the AC adaptor (included, plugs into standard household outlets 120V AC). Remote control receiver also runs on battery power (9V alkaline battery - not included). Requires one PR12 light bulb (included). An adult must install the battery (if used) and replace the light bulb. Tool needed for battery installation and light bulb replacement: Phillips screwdriver. Soothing Dreams Monitor with Remote Control TM Model Number: 71597 For proper set-up and use, please read these instructions. Please keep this instruction sheet for future reference, as it contains important information. Transmitter is electrically powered. Remote control receiver is powered by the AC adaptor (included, plugs into standard household outlets 120V AC). Remote control receiver also runs on battery power (9V alkaline battery - not included). Requires one PR12 light bulb (included). An adult must install the battery (if used) and replace the light bulb. Tool needed for battery installation and light bulb replacement: Phillips screwdriver. Soothing Dreams Monitor with Remote Control TM 2 2 This product cannot replace responsible adult supervision. CAUTION IMPORTANT! - - Or write to: Consumer Information This product cannot replace responsible adult supervision. CAUTION IMPORTANT! - - Or write to: Consumer Information • This product is not intended to be used as a medical monitor and its use should not replace adult supervision. • Test sound reception of remote control receiver before first-time use and whenever you change location of transmitter. • To prevent entanglement: Never place transmitter in a crib or playpen. Keep transmitter and remote control receiver out of baby’s reach. Never use extension cords with the AC adaptor. • Never use transmitter or remote control receiver near water (ie.: bathtub, sink, laundry tub or wet basement, etc.). • Always use transmitter and remote control receiver where there is adequate ventilation. To prevent overheating, keep transmitter and remote control receiver away from heat sources such as radiators, heat registers, direct sunlight, stoves, amplifiers, or other appliances which produce heat. • Never attempt to modify this product. Occasionally a consumer may experience a problem with one of our products. If this should happen, please call us toll-free, rather than return this product to the store. Usually, we can solve the problem over the telephone or send you replacement parts. Please call Fisher-Price® Consumer Relations, toll-free at 1-800-432-KIDS, between 8 AM - 6 PM EST, Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment, please call 1-800-382-7470. Fisher-Price® Consumer Relations 636 Girard Avenue East Aurora, New York 14052 3 Remote Control Receiver Battery Installation (Optional) 4 Battery Compartment Door • Locate battery compartment door on back of remote control receiver. • Loosen screw in battery compartment door with a Phillips screwdriver. Lift to remove battery compartment door. • Snap terminals of a fresh, 9V alkaline battery into remote control receiver connectors. • Replace battery compartment door and tighten screw. Do not over-tighten. Battery Tips • Remove the battery during long periods of non-use. Always remove an exhausted battery from the product. Battery leakage and corrosion can damage this product. Dispose of battery safely. • Do not dispose of the battery in a fire. The battery may explode or leak. • Never short circuit the battery terminals. • A non-rechargeable battery is not to be recharged. • Only a battery of the same or equivalent type as recommended in the “Battery Installation” instructions is to be used. • If a removable rechargeable battery is used, it is only to be charged under adult supervision. • A rechargeable battery is to be removed from the product before it is charged. • If you use a battery charger, it should be examined regularly for damage to the cord, plug, enclosure and other parts. Do not use a damaged battery charger until it has been properly repaired. 9V (6LR61) SHOWN ACTUAL SIZE Remote Control Receiver Battery Installation (Optional) 4 Battery Compartment Door • Locate battery compartment door on back of remote control receiver. • Loosen screw in battery compartment door with a Phillips screwdriver. Lift to remove battery compartment door. • Snap terminals of a fresh, 9V alkaline battery into remote control receiver connectors. • Replace battery compartment door and tighten screw. Do not over-tighten. Battery Tips • Remove the battery during long periods of non-use. Always remove an exhausted battery from the product. Battery leakage and corrosion can damage this product. Dispose of battery safely. • Do not dispose of the battery in a fire. The battery may explode or leak. • Never short circuit the battery terminals. • A non-rechargeable battery is not to be recharged. • Only a battery of the same or equivalent type as re...