Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
Do not put the Nursery Units inside a crib or playard. • Use ONLY with 110-120 volt AC electrical outlets. • Protect the AC adapter cords. Place them so they are not walked on or pinched by furniture or other items. • Allow for proper ventilation when units are in use. Do not cover the Nursery Units or such as a blanket. Do not place them in a drawer or in any location which would muffle the sound or interfere with the normal flow of air. • DO NOT immerse any part of the Nursery Units, Parent Units, or Docking Stations in water. Clean only with a dry cloth. • DO NOT place the Units near water and moisture. Do not use the Units outdoors. Do not use the Units near possible wet areas, such as a bathtub, shower, wash basin, sink, laundry tub, swimming pool, wet basement, etc. Parent Units with any object 3 • Keep Units away from heat sources, such as fireplaces, radiators, stoves, and TVs or other appliances. Heat can damage the case or electrical parts. • DO NOT use the Units if: • The AC adapter cords or plugs have been damaged. • The units have been exposed to liquids. • The units have been dropped or are damaged. • DO NOT OPEN THE NURSERY UNITS, PARENT UNITS, DOCKING STATIONS OR ADAPTERS. No user-serviceable parts inside. Risk of electrical shock, fire or death. • The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm (7.9”) from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. 4 interference to radio communications. FCC STATEMENT However, there is no guarantee that interference will not occur WARNING Modifications not in a particular installation. If this authorized by the manufacturer equipment does cause may void users authority to harmful interference to radio or operate this device. television reception, which can NOTE: This equipment has been be determined by turning the tested and found to comply equipment off and on, the with the limits for a Class B user is encouraged to try to digital device, pursuant to Part correct the interference by one 15 of the FCC Rules. These limits or more of the following are designed to provide measures: reasonable protection against • Reorient or relocate the harmful interference in a receiving antenna. residential installation. This • Increase the separation equipment generates, uses and between the equipment and can radiate radio frequency receiver. energy and, if not installed and used in accordance with the instructions, may cause harmful 5 • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Parent Unit Overview VOLUME ON/OFF VIBRATION vibe VIBELINK SOUND LIGHTS SPEAKER CHARGER PORT 7 SPEAKER/LIGHTS Nursery Unit Overview MICROPHONE NIGHT LIGHT BUTTON ON/OFF PARENT UNIT FINDER CHANNEL chpf 8 Battery Door Options 1 ARM BELT NECK Select one of 3 battery doors according to your preference in carrying the parent unit. You can carry the parent unit around your arm, belt, or neck. All 3 choices can be used on the parent unit. 9 Remove battery door. GS P523040600m Ah3.7V2 GSP523040600m Ah3.7V3 Replace battery door with one of the 2 other door selections. 10 Installing Battery 45 Remove battery door. Plug battery in. Make sure to push the connector tight. 11 Re-attach battery door. GSP523040600m Ah3.7V6 7 Battery installation is complete. 12 Docking Station 89 Connect AC adapter to the back of the docking station. 13 1010 11 Place parent unit in the dock to charge battery. The dock light will illuminate while unit charges. Light will turn off when fully charged. Charge battery for 5 hours before use. To use while charging, press the power button to activate unit. Make sure unit charges for 5 hours before removing from docking station. Volume is amplified while in docking station. Adjust volume by pressing + or -. 14 Activating Vibration 12vibevibe Press “Vibe” button briefly to activate vibration feature. To turn off vibration, press button again. “Vibe” Icon will appear when vibration is on. 15 To adjust vibration vibevibe13 NOTE: Vibration will automatically shut off when parent unit is in dock. To adjust the level at which the vibration alert is activated, press and hold the “Vibe” button on the side of the parent unit. The sound lights will illuminate to show the vibration alert adjustment setting. Press the volume UP/DOWN switch to change the setting. A lower sound light setting will make the vibration activate for quieter sounds. A higher sound light setting will make the vibration activate for louder sounds. When the sound in the nursery goes above the sound light le...