Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Testing Sound Reception Adjust Channel • Sound lights turn on when sound is received by a receiver. -One or two lights for shallow sounds -Three or more lights for louder sounds. • If you experience interference (buzzing or static, etc.) while using one channel setting, switch all units to other channel. Selecting a channel is usually a one time adjustment. Hint: You will see all five sound lights: -If you turn receiver power on before transmitter power. You will also hear static noise. Turn volume down and turn transmitter power on. -If the receiver is too far away from the transmitter. Move the receiver closer to the transmitter. -If loud sounds are transmitting. Adjust Channel Setup & Use • Place transmitter in same room with child. Point microphone directly toward crib/cot or play area. • Unwrap and fully extend power cord for best transmission. Plug power cord into wall outlet. • Use the power cord only in a wall outlet. Do not plug the power cord into a ceiling light. • Press transmitter power button to turn power on. • Press night light on transmitter for a soft, glowing light. (Press again to turn off night light.) Setup & Use • Place receiver where you will see or hear it. • Unwrap and fully extend AC adaptor cord for best reception. Insert AC adaptor jack into receiver socket and plug into wall outlet. Note: To use batteries as a power source, refer to instructions on page 7. • Rotate receiver on/off/volume dial to turn power on. Power/low battery indicator lights. Rotate on/off/volume dial to adjust volume. Setup & Use • Clip to your clothes to stay in touch with baby around your house or yard. Hint: Under permitting conditions, the receiver receives sounds up to 122 meters away from baby! Problems & Solutions Problem Solution You hear static or buzzing Receiver is out of range of transmitter. Move receiver closer to transmitter. Note: Range varies depending on surrounding conditions such as noise levels, physical obstructions and signal interference. Transmitter power is off. Turn transmitter power on. Channel switches are on different channels. Make sure channel switches on both transmitter and receiver are set to same channel. Loose power cord connection and transmitter power is off. Check transmitter power cord plug-to-outlet connection. No power to wall outlet and transmitter power is off. Make sure light switch that controls power flow to wall outlet is on. Power is off because circuit breaker for room is off. Make sure house fuses and circuit breakers are on. Receiver power/low battery indicator does not light Receiver power is off. Turn receiver power on. Batteries in receiver are weak or dead. Replace all batteries with three, alkaline “AAA” (LR03) batteries or use AC adaptor as power source. Power is off because circuit breaker for room is off. Make sure house fuses and circuit breakers are on. No power to wall outlet and power is off. Make sure light switch that controls power flow to wall outlet is on. Receiver power/low battery indicator turns orange Batteries in receiver are weak or dead. Replace all batteries with three, alkaline “AAA” (LR03) batteries or use AC adaptor as power source. Transmitter power indicator does not light Transmitter power is off. Turn transmitter power on. Loose power cord connection and transmitter power is off. Check transmitter power cord plug-to-outlet connection. No power to wall outlet and transmitter power is off. Make sure light switch that controls power flow to wall outlet is on. Power is off because circuit breaker for baby’s room is off. Make sure house fuses and circuit breakers are on. You can hear conversations or sounds from other homes There is signal interference due to other nursery monitors on same channel or cordless telephone use. Change channel switches on both transmitter and receiver to eliminate source of interference. Hint: If, after checking all of these solutions, you believe that your transmitter power cord or AC adaptor are damaged, please contact Fisher-Price®. One (1) Year Limited Warranty Mattel Australia Pty., Ltd., (658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia) warrants to the original owner that this product is free from all defects in material and workmanship when used under normal conditions for a period of one (1) year from the date of purchase. Should the product fail to perform properly, we will repair replace it at our option, free of charge. Purchaser is responsible for shipping the product to the Fisher-Price Product Service Department at the address indicated above and for all associated freight and insurance costs. Fisher-Price Inc., will bear the cost of shipping the repaired or replacement item to you. The warranty is void if the owner repairs or modifies the product. The is warranty excludes any liability other than that expressly stated above, including, but not limited to, any incidental or consequential damages. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR...