Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Kenwood, modell FleetSync TK-980

Hersteller: Kenwood
Dateigröße: 729.46 kb
Dateiname: 9fe85614-ccf3-4b6a-b767-fba5b4423023.pdf

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Contact an authorized Kenwood dealer for details and complete list of all accessories and options. Specifications Model TK-980 TK-981 Model TK-980 TK-981 GENERAL RECEIVER (Measurements made per TIA/EIA-603) Frequency Range Sensitivity (12 dB SINAD) 0.25 .V Type 1 (RX) 851~870 MHz 935 ~ 941 MHz Selectivity* 75 dB 68 dB Type 2 (TX) 806 ~ 825 MHz, 896 ~ 902 MHz, Intermodulation Distortion 70 dB 65 dB Type 3 (Talk Around) 851 ~ 870 MHz 935 ~ 941 MHz Spurious Response* 80 dB Systems Max. 32 Audio Output 4 W with less than 5% distortion Group Max. 250 per system Channel frequency spread 19 MHz 6 MHz Channels TRANSMITTER (Measurements made per TIA/EIA-603) LTR® Mode Max. 600 (Conventional) Max. 250 RF Power Output 15 W Spurious & Harmonics 60 dB (PLL step: 12.5 kHz) Modulation 16KOF3E 11KOF3E PLL Channel Spacing 25 kHz 12.5 kHz Operating Voltage 13.6 V DC ± 15 % FM Noise 45 dB 40 dB Current Drain Audio Distortion Less than 3% Less than 5% Standby Less than 0.4 A Microphone Impedance Low Impedance Receive Less than 1.0 A Channel Frequency Spread 64 MHz 45 MHz Transmit Less than 7.0 A Duty Cycle Transmit: 20% * Typical specifications Kenwood follows a policy of continuous advancement in development. Operating Temperature -22° F ~ +140° F For this reason specifications may be changed without notice. Range (-30° C ~ +60° C) FleetSync® is a registered trademark of Kenwood Corporation. Frequency Stability ±0.00015% LTR® is a registered trademark of Transcrypt International. (-22° F ~ +140° F) Antenna Impedance 50 . Dimensions (W x H x D) 5-1/2 x 1-1/2 x 5-3/4 in. (140 x 40 x 145 mm) Weight (net) 2.07 lbs. (940 g) FCC ID ALH24563110 ALH24572110 IC Certification 282195546A 282195545A Applicable MIL-STD footnotes from Front: Standard MIL 810C MIL 810D MIL 810E MIL 810F 1 Trunked Format: 32 Systems max. (prog. for LTR® or Conventional), Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures 250 Groups per system max (limited per repeater channels programmed). Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II 2 DTMF Encode includes PTT ID, Emergency ANI, Manual Encode (KMC-28A DTMF mic required), Auto-Dial (32 numbers); DTMF Decode includes Stun (dead beat disable), primary/secondary Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II selective call with call alert and transpond. High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II Temperature Shock Solar Radiation 503.1/Procedure I 505.1/Procedure I 503.2/Procedure I 505.2/Procedure I 503.3/Procedure I 505.3/Procedure I 503.4/Procedure I, II 505.4/Procedure I 3 Ignition sense requires KCT-34 ACC cable & KCT-18 Ignition sense cable options. 4 Public Address / Horn Alert Option- requires KAP-1 PA/HA Unit and Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4 KCT-34 ACC Cable options. 5 KPG-49D required: Windows® 98/ ...