Stimmen - 1, Durchschnittliche Bewertung: 3 ( )

Hersteller: Kenwood Dateigröße: 996.36 kb Dateiname: Unterrichtssprache:

4 Press [MR] to copy the memory channel data to the new channel. Note: When transferring to the Program Scan memory channels (L0/U0 ~ L9/U9) and the Priority channel (Pr), the Memory Channel Lockout information is not copied. CHANNEL DISPLAY MODE While in this mode, the transceiver displays only memory channel numbers (or Memory names if they have been stored) instead of frequencies. Press [PTT] + [MR] + Power ON. • The transceiver displays the memory channel number in place of the operating frequency. To recover normal operation, turn the transceiver OFF and press [PTT] + [MR] + Power ON again. 25 Note: . To enter the Channel Display Mode, you must have at least one memory channel that contains the data. . If the memory channel contains the Memory name data, the Memory name is displayed in place of the “CH” characters. . You cannot enter Channel Display mode while Key Lock is ON. While in the Channel Display mode, only the following keys can be operated. [KEY] PTT MONI F MR CALL LOW SQL LAMP ENT [F] - [KEY] MONI LAMP [KEY] (1s) F MR CALL While transmitting: MONI A [F] B [VFO] C [MR] D [CALL] 0 1 2 3 4 5 6 7 8 9 # 26 SCAN Scan is a useful feature for hands-off monitoring of your favorite frequencies. Becoming comfortable with all types of Scan will increase your operating efficiency. This transceiver provides the following type of scans: Band Scan Scans all frequencies on the current band. Program Scan Scans the specified frequency ranges stored in Memory channels L0/U0 ~ L2/U2. Memory Scan Scans all frequencies stored in the Memory channels. CALL Scan Scans the Call channel as well as the currently selected VFO frequency or Memory channel. Priority Scan Checks the activities on the Priority channel (Pr) every 3 seconds. Note: . When the CTCSS or DCS function is activated, the transceiver stops at a busy frequency and decodes the CTCSS tone or DCS code. If the tone or code matches, the transceiver unmutes. Otherwise, it resumes scanning. . Press and hold [MONI] to pause scan in order to monitor the scanning frequency. Release [MONI] to resume scanning. . Pressing [MENU] causes scan to stop. . If you press any key other than the following keys during scan, the transceiver exits scan (excluding Priority Scan): [MONI], [LAMP], [F], [SQL], [F] (1s), or [F] - [LAMP]. BAND SCAN The transceiver scans the entire band of the frequency you selected. For example, if you are operating and receiving at 144.525 MHz, it scans all the frequencies available for the 2 m band. When the current VFO receiving frequency is outside the Program Scan frequency range {page 38}, the transceiver scans the entire frequency range available for the current VFO. 1 Press [VFO]. 2 Rotate the ENC control to select the frequency outside of the Program Scan frequency range. 3 Press [VFO] (1s). • Scan starts at the current frequency. • The 1 MHz point blinks while scanning is in progress. • To change the scan direction, rotate the ENC control clockwise or counterclockwise . 4 To exit Band Scan, press any key other than [MONI], [LAMP], [F], [SQL], [F] (1s), or [F] - [LAMP]. 27 PROGRAM SCAN You can limit the scanning frequency range. There are 3 memory channel pairs (L0/U0 ~ L2/U2) available for specifying the start and end frequencies. Program Scan monitors the range between the start and end frequencies that you have stored in these memory channels. Before performing Program Scan, store the Program Scan frequency range to one of the memory channel pairs (L0/U0 ~ L2/U2). STORING A PROGRAM SCAN FREQUENCY RANGE 1 Press [VFO], then rotate the ENC control to select your desired start frequency. 2 Press [F] - [MR], then rotate the ENC control to select a memory channel from L0 ~ L2. 3 Press [MR] to store the start frequency in the memory channel. 4 Rotate the ENC control to select your desired end frequency. 5 Press [F] - [MR], then rotate the ENC control to select a channel from U0 ~ U2, corresponding to the channel selected in step 2. • For example, if you selected L0 in step 3, select U0 for the end frequency. 6 Press [MR] to store the end frequency in the memory channel. USING PROGRAM SCAN 1 Press [VFO], then rotate the ENC control to select a frequency within the frequency range of memory channel L0/U0 ~ L2/U2. 2 Press [VFO] (1s) to start Program Scan. • The 1 MHz point blinks while scanning is in progress. 3 To stop Program Scan, press any key other than [MONI], [LAMP], [F], [SQL], [F] (1s), or [F] - [LAMP]. Note: . If you press [MONI], Program Scan temporarily pauses. Release [MONI] to resume scanning. . The transceiver stops scanning when it detects a signal. . If more than 2 Program Scan channel pairs are stored and the frequency range among the pairs overlaps, the smaller Program Scan memory channel number has priority. . To perform Program Scan, the “L” channel frequency must be lower than the “U” channel. 28 MEMORY SCAN 1 Press [MR] (1s). • Scan starts from the last memory channel number and ascends up through...

Herunterladen

Geben Sie zwei Ziffern: