Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Kenwood Dateigröße: 1.16 mb Dateiname: Unterrichtssprache:

• Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer for technical assistance. PRECAUTIONS Observe the following precautions to prevent fire, personal injury, and KCH-16/ transceiver damage. • Do not drop the KCH-16; strong impacts can damage the internal components. • Do not over stress the KCH-16 cable by pulling on it with excessive force. • Do not attempt to configure the KCH-16/ transceiver while driving; it is too dangerous. • Do not disassemble or modify the KCH-16/ transceiver for any reason. • Do not expose the KCH-16/ transceiver to long periods of direct sunlight, nor place it near heating appliances. • If an abnormal odor or smoke is detected coming from the KCH-16 or transceiver, switch the KCH-16/ transceiver power off immediately, and contact your Kenwood dealer. UNPACKING AND CHECKING EQUIPMENT Note: The following unpacking instructions are for use by your Kenwood dealer, an authorized Kenwood service facility, or the factory. Carefully unpack the Handheld Control Head. We recommend that you identify the items listed in the following table before discarding the packing material. If any items are missing or have been damaged during shipment, file a claim with the carrier immediately. Supplied Accessories Item Part Number Quantity Hanger (with 4 x 16 mm self-tapping screws) J19-5482-XX 1 set Instruction manual B62-2101-XX 1 SPECIFICATIONS Operating temperature range -30. .+60. Microphone impedance 2.2 k. (Max) Dimensions (W . H . D) without projections 58 . 125 . 31.5 mm 2.3 . 4.9 . 1.2 inches with projections 68 . 125 . 36 mm 2.7 . 4.9 . 1.4 inches Weight Cable not included Approx. 185 g / 6.5 oz Cable included Approx. 280 g / 9.9 oz GETTING AQUAINTED Handheld Control Head q Power switch Press to switch the transceiver ON. Press and hold for approximately 1 second to switch the transceiver OFF. w Display e Right (Zone Up) key Press to increase the zone number (Default setting). Also press to increase setting adjustments. r Left (Zone Down) key Press to decrease the zone number (Default setting). Also press to decrease setting adjustments. t VOL (Volume) control Rotate clockwise to increase the volume level. Rotate counterclockwise to decrease the volume level. y DTMF keypad Press the keys on the keypad to make DTMF calls. The default setting is None (no function). u Up (Channel Up) key : PF 6 (Programmable Function) key Press to increase the channel number (Default setting). Your dealer can also enable the CH key to be used when making setting adjustments, as an optional method for using the Right key. i Down (Channel Down) key :PF 7 (Programmable Function) key Press to decrease the channel number (Default setting). Your dealer can also enable the CH key to be used when making setting adjustments, as an optional method for using the Left key. o S / A / B / C / Orange (Programmable Function) keys Pr...

Herunterladen

Geben Sie zwei Ziffern: