Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Electrolux, modell Standard And High Speed Floor Machine P201

Hersteller: Electrolux
Dateigröße: 83.49 kb
Dateiname: 841bf8be-99f2-48f3-8f70-ed13c825f5d5.pdf

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

HOW TO OPERATE THE MACHINE With the drive block and pad, brush or attachment in the ready-to-use position, the handle locked at the desired operating height, and the electric cable plugged in, place hands on the handle grips and squeeze the switch triggers beneath the handle grips. (See picture #3) This activates the motor and starts the block, brush or attachment in operation. CAUTION: When leaving the machine unattended, disconnect the wall plug and return the handle to the “locked” upright position to prevent accidental starting. TO GUIDE YOUR FLOOR MACHINE To Right: raise handle slightly. The higher the handle is lifted, the faster the machine will move to the right. To Left: to change direction, lower the handle until the machine travels to the left. The more the handle is lowered, the faster the movement to the left. TO INSTALL THE OPTIONAL SOLUTION TANK Mount the solution tank to the front of the handle and attach with mounting brackets and knobs. Position the solution tank control handle horizontally and below the switch lever of the machine and adjacent to the right handle grip. Remove the plug from the motor housing and insert the (long) extension tube adaptor and secure at bottom of machine with the retainer. The solution tank should be used only with a showerfeed drive block or brush. Picture #1 Picture #2 Picture #3 Switch Trigger APPLICATION OF THE HIGH SPEED 300 RPM FLOOR MACHINES (MODELS P203 and P173) Spray Buffing to revitalize an existing floor finish to a “wet look” shine especially in heavy traffic areas using a Powr-HD™ yellow or natural hoghair blend pad. Dry Buffing with a brush on uneven floors coated with a buffable finish or with a Powr-HD™ tan, beige or white pad on even floor surfaces. OPERATIONS OF THE HIGH SPEED 300 RPM (MODELS P203 and P172) Follow the same operation procedures described for 175 RPM machines. APPLICATION OF THE DUAL SPEED 175/320 RPM MACHINES(MODELS P202 and P172) The Powr-Flite® dual speed machines will operate in a broad range of applications. These machines perform all the applications of the 175 RPM standard speed machines and the 300 RPM high speed machines except the specialized applications. Do not use dual speed machines for sanding, grinding or scraping. The dual speed machines are specially designed for spray cleaning of heavy traffic areas. OPERATION OF THE DUAL SPEED MACHINES Follow the operation procedures described for 175 RPM machines. The proper speed selection is important to properly operate these machines. Speed selection Low (175 RPM) or High (320 RPM) is made with the switch located on the base and motor housing. (See Picture #4) Stripping, scrubbing, bonnet cleaning and shampooing should be performed at 175 RPM Low Speed. Spray buffing and dry buffing should be performed at 320 RPM, High Speed. Spray cleaning is a two speed maintenance operation. Apply a spray buff chemical such as Powr-Glo® to the floor ahead of the machine. Make the first passes through the spray buff at low speed with an open weave pad such as the Powr-HD™ blue cleaner pad or the brown hoghair blend spray cleaner pad. Remove the spray cleaning pad and place a buffing pad on the machine such as Powr-HD™ yellow, beige or natural hoghair blend pads. Switch the speed to High 320 RPM and buff the dulled finish to a high gloss. Unplug the power cord and wrap it under the cord hook and over the right handle grip. Clean the cord off to prevent heavy soiling and...