Stimmen - 5, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
This appliance includes some or all of the following features (fig. A). 1. On/off switch 2. Speed control switch 3. Cord rewind button 4. Handle 5. Cover 6. Hose 7. Airflow control switch 8. Extension tube 9. Suction head 10. Wheels In addition, this appliance is supplied with some or all of the following accessories (fig. B): 11. Crevice tool 12. Brush tool 13. Wooden floor brush 14. Filter cleaning brush 15. Turbo brush Features A 8 3 9 10 4 1 2 5 6 7 B 11 12 13 14 15 Connecting the hose (fig. C) • Insert the hose connector (15) into the inlet (16) of the appliance. • Slide the hose further until the release buttons (16) click into place. • To disconnect the hose, press the release buttons and pull out the hose. Mounting the extension tube (fig. D) • Press the lock button (17) and slide the hose nozzle (18) into the tube (8) until it clicks into place. • To remove the tube, press the lock button and pull the hose out of the tube. Mounting the suction head (fig. E) The suction head (9) allows for vacuuming on carpet and hard surfaces (e.g. laminate and tiles). • Press the lock button (19) and slide the tube (8) into the suction head (9) until it clicks into place. • To remove the suction head, press the lock button and pull the tube out of the suction head. Mounting the wooden floor brush (fig. E) The wooden floor brush (13) allows for vacuuming on wooden and polished surfaces. • Press the lock button (19) and slide the tube (8) into the wooden floor brush until it clicks into place. • To remove the wooden floor brush, press the lock button and pull the tube out of the wooden floor brush. Mounting the turbo brush (fig. E) The turbo brush (15) allows for deep carpet cleaning. • Press the lock button (19) and slide the tube (8) into the turbo brush until it clicks into place. • To remove the turbo brush, press the lock button and pull the tube out of the turbo brush. Mounting accessories (fig. E & F) The crevice tool (11) allows for vacuuming in narrow and hard-to-reach places. The brush tool (12) allows for vacuuming on furniture, blinds, curtains, windows and stairs. The accessories can be mounted on both the hose (6) and the tube (8). When not in use, the accessories can be stored in the accessory holder (20). • Remove the accessory from the holder (fig. E). • Press the lock button (17 or 19) and slide the accessory onto the hose nozzle (18) or the tube (8) (fig. F). • To remove an accessory, press the lock button (17 or 19) and pull the accessory off. Unwinding and rewinding the cord (fig. A) The cord rewind button (3) can be operated by hand or foot. • Before use, pull a sufficient length of cord from the back of the appliance. • After use, press the cord rewind button to store the cord back into place. Manually guide the cord to ensure it does not swing back. Ensure the plug is correctly located. Adjusting the length of the tube (fig. G) The extension tube (8) can be adjusted in 21 steps. • Engage the adjustment knob (21) and slide the tube to the desired length. • Release the knob. Adjusting the suction head (fig. E) • For vacuuming on carpets, switch the floor surface selector (22) into the up position. • For vacuuming on laminates, tiles, etc., switch the floor surface selector into the down position. Switching on and off (fig. A) The on/off switch (1) can be operated by hand or foot. • To switch the appliance on, press the on/off switch (1). • To switch the appliance off, press the on/off switch again. Assembly 17 15 16 17 C D 18 19 8 E 11 12 6 9 23 13 20 8 18 19 15 8 12 14 21 11 F 8 G 22 H I 24 Q 35 25 26 J 28 29 27 K L 27 5 30 M 31 14 N O 33 P 34 Use Setting the suction force (fig. A) The speed control switch (2) allows for a precise setting of the suction force. • Slide the speed control switch (2) to the desired setting. • For vacuuming on hard surfaces (e.g. floors), choose a high speed setting. • For vacuuming on soft surfaces (e.g. upholstery), choose a low speed setting. Adjusting the airflow (fig. A) • Move the airflow control switch (7) to adjust the airflow as desired. Vacuuming • When operating the appliance, make sure that the hose is not trapped, twisted or blocked. • In case of overheating, a cut-out will operate and the appliance will automatically stop. • If the appliance stops operating, unplug the appliance and allow it to cool for 2-3 hours. Hints for optimum use • When working in confined spaces, temporarily remove the accessory holder from the tube to improve your scope. • When vacuuming stairs, always start at the bottom and work your way up. Position the appliance on the floor and do the stairs until halfway. Then carry the appliance to a stable position which is at least one stair below your working position, and do the top half of the stairs. Carrying the appliance (fig. H) During use the appliance can be carried using the handle (4). • Tilt the handle into positition as shown. Temporarily parking the suction head (fig. I) • Use the park position (23) for a temporary parki...
Dieses Handbuch ist für folgende Modelle:Staubsauger - CV1400 (490.41 kb)