Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
3) Adjust the strap length to fit your body. A TYPE B TYPE 1 Locker * 2 3 2 3 When not using the strap -Detach the lockers by pushing them down and drawing them out from the unit. -Keep the strap separately for the next time you want to use it. A TYPE B TYPE 5 6 MAINTENANCE OR REPLACEMENT OF THE FILTERS SECONDARY FILTER SECONDARY FILTER REPLACING THE DUST BAG INLET FILTER To protect the motor, your cleaner features a secondary filter at the front of the motor in the dust compartment. Do not allow the filter to become clogged. Suction power reduction or motor damage may result. After cleaning the secondary filter attach it in place. TRANSPORTING AND STORING THE VACUUM CLEANER Located on the top rear side of the vacuum-cleaner, there is a nozzle support that can be used to park the nozzle during pauses in cleaning. For easy storage and transportation, this vacuum cleaner has a clip system built onto the body, which will keep the tube, hose and nozzle in a vertical position. PARK POSITION 1) To open the dust cover of the dust bag compartment, press the clamper upwards. (The clamper is located at the front of the dust cover) 2) Remove the dust bag from the cleaner. 3) After removing the used dust bag, insert the cardboard bag collar of the new dust bag into its original position. 4) Press the dust cover down gently until the clamper relocks. FOR CLOTH FILTER BAG After using, if the cloth filter bag is full of dust, clean the cloth filter bag and use it again. 7 This Vacuum cleaner is approved the following EMC Directive : 89/336/EEC, 92/31EEC and 93/68/EEC Low Voltage Safety Directive : 73/23/EEC and 93/68/EEC USAGE OF FLOOR NOZZLE Select the carpet indicator . when cleaning carpets. Select flat surface indicator . when cleaning the floors, tiles, etc. FOR RUG / FLOOR SELECTOR Before use make sure that the position of the selector is in the right position for the type of surface to be cleaned. FOR UNIVERSAL BRUSH Use the floor nozzle for cleaning all surfaces. NOTE: For optimum efficiency, clean floor brush with crevice tool. OUTLET FILTER NOTE: The filters must be completely dried before being replaced in the dust compartment. 1) Open the grille part, separate the exhausted filter. 2) Reassemble it after cleaning or replacing the filter in the reverse order. TROUBLE SHOOTING Motor does not start. No power supply. Check cable, plug and socket. Suction force is gradually Filter, nozzle, suction hose Remove the object. decreasing. or tube is blocked. Cord does not rewind fully. Check that the cord is not Pull the cord out 2~3m & twisted or wound unevenly. push down the cord rewind button. PROBLEM CAUSE REMEDY CODE NO : DJ68-00068A REV(0.2) ...
Dieses Handbuch ist für folgende Modelle:Staubsauger - VC-5913 (527.67 kb)
Staubsauger - VC-5913V (527.67 kb)
Staubsauger - VC-5914 (527.67 kb)
Staubsauger - VC-5914V (527.67 kb)