Login:
Stimmen - 4, Durchschnittliche Bewertung: 4.3 ( )

Anleitung Panasonic, modell MCV5117

Hersteller: Panasonic
Dateigröße: 1.01 mb
Dateiname: MCV5117.PDF
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


Assemble the hose and attachments to the cleaner as follows: Place the hose on the tool holder in front of the handle. Grasp the end of the hose and push it down over the wand, twisting as you push down. Place the wand in the middle slot of the toot holder, twisting and pushing down over the short hose to assure a good connection. Store the dusting brush in the front of the tool holder. Place the crevice tool into the rear slot of the tool holder. Refer to the illustration in the Parts Identification section for correct attachment storage. ATTACHMENTS -Exfens/on __) Wand Dusting—► Brush Crevice Tool A SPECIAL FEATURES OF CLEANER AUTOMATIC SELF ADJUSTING RUG NOZZLE Your Panasonic upright vacuum cleaner is designed with an automatic self adjusting rug nozzle. No manual adjustments are required. The height of the rug nozzle is instantly and automatically adjusted to any carpet pile height. This self adjusting feature allows the rug nozzle to float evenly over all carpet pile surfaces. Deep Pife Carpet Shallow Pile Carpet VAC GAUGE The vac gauge located on the front of your vacuum cleaner (dust cover) indicates when the dust bag should be changed. Change the dust bag when "Full" is indicated in order to maintain the best cleaning efficiency. Note: If the vac gauge indicates "Full1 while the dust bag is still empty, check to see if there are any clogs as explained in the Removing Clogs section. The vac gauge indicator may not move as expected when loose, fluffy dust is vacuumed. -8- TO OPERATE CLEANER A CAUTION Do not use outlets above counters Damage to items m the surrounding areas could occur Be sure the switch is in the off position while plugging the cord in. POWER CORD NOTE To reduce the nsk of electrical shock, this vacuum has a polarized plug, (one blade is wider than the other) This plug will fit in a polarized outlet only one way If the plug does not fit fully in the outlet, reverse the plug If it stall does not fit, contact a qualified electrician to install the proper outlet DO NOT CHANGE THE PLUG IN ANY WAY ON/OFF SWITCH 1 Plug the power cord into a 120V outlet 2 To start the vacuum cleaner, push the switch on the top of the dust compartment to the ON position 3 To stop the vacuum cleaner, push the switch on the top of the dust compartment to the OFF position OFF ON r HANDLE ADJUSTMENTS The handle may be lowered to any position required Just step on the area as indicated by the illustration and lower the handle as desired 1 Upright position The handle locks in this position for storage The handle should always be in an upnght positon when the cleaning tools are used 2 Middle position This position is for normal cleaning 3 Low position This position is used for cleaning under furniture -9- A WARNING Personal Injury Hazard when Using Attachments DO NOT place hands or feet underneath the unit when using the attachment tools The agitator assembly begins to revolve rapidly when using attachments A CAUTION When using the attachments, the agitator begins rotating Do not allow the cleaner to remain in just one place for a period of time, as the agitator may damage the floor surface. Avoid placing the cleaner on furniture, the fringed area of rugs, deep pile carpeting, or carpeted stairs. The ideal position for the cleaner when using attachments is for the unit to be on a level area with the handle in the full upright position. To remove the wand from the short hose, grasp the top part of the wand (see illustration) and twist as you pull up Once the wand has been removed it can be used as is The crevice tool can be attached to the hose or the end of the wand When attaching the extension wand or crevice tool, always twist as you push down If additional reach is required the dusting brush can be attached to the end of the crevice tool When using the attachments DO NOT overextend your reach with the hose as it could tip the cleaner over To store attachments, place the hose on the hose holder in front of the handle Return the wand to the tool holder, twisting as you push down to connect it to the short hose cuff Store the dusting brush in the front of the tool holder Return the crevice tool to the tool holder ATTACHMENT USE CLEANING AREA ATTACHMENT Furniture* Between Cushions* Drapes* Stairs Walls Bare Floors CREVICE TOOLf^^^y X X X X X DUSTING BRUSH & X X X X *Aiwaya clean attachments before using on fabrics Attachments used in dirty areas (such as under a refrigerator) should not be used on other surfaces until they are washed Ttiay could leave marks (See the Cleaning Exterior and Attachments section ) Use discretion when using attachments as each type of cleaning area may vary (for example, wood vs carpeted stairs) -10- ROUTINE CARE OF CLEANER Performing the following tasks wiiE keep your new Panasonic vacuum cleaner operating at peak performance levels and will insure these high levels for years to come. Check the Before Request...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien