Stimmen - 5, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Billy Goat Dateigröße: 574.17 kb Dateiname: Unterrichtssprache:

49,50,51) 900255 1 800988 1 800988 1 800097 1 800097 1 48 KD PARTS EAG HANDLE ASSY 900475 1 900475 1 - - 900475T 1 - - 49 KEY 9201121 1 9201121 1 9201121 1 9201121 1 9201121 1 50 WASHER LOCK 3/8 TWIST TOOTH 400502 1 400502 1 400502 1 400502 1 400502 1 51 CAPSCREW (HARDENED) 900243 1 900243 1 900243 1 900243 1 900243 1 52 HOUSING ASSY 900257 1 900257 1 900257 1 900257 1 900257 1 53 ENGINE 900244 1 900166 1 900166 1 900166T 1 900166T 1 54 NUT LOCK 5/16-18 8160002 3 8160002 4 8160002 4 8160002 4 8160002 4 55 PLUNGER 900165 1 900165 1 - - 900165 1 - - 56 SCREWCAP 5/16-18 x 1 1/4 8041029 3 8041029 4 8041029 4 8041029 4 8041029 4 57 HANDLE AND CAELE - - - - 900145-01 1 - - 900145-01 1 58 SLEEVE AND HARDWARE - - - - 900145-02 1 - - 900145-02 1 59 KD PARTS EAG WHEEL ASSY 900476 1 900476 1 900476 1 900476 1 900476 1 60 CAP END 1' - - - - 800392 2 - - 800392 2 61 62 LAEEL CAUTION HANDS AND FEET 900326 1 900326 1 900326 1 900326 1 900326 1 63 LAEEL CAUTION HOT ENGINE 400268 1 400268 1 400268 1 400268 1 400268 1 PART NO. 900183 FORM NO. 122887 SAFETY PRECAUTIONS ASSEMBLY Like all mechanical tools, reasonable care must be used when operating the machine. Read all instructions! 1. Disconnect spark plug wire before servicing 2. Do not put gas in tank when hot or in an enclosed area. 3. Do not start engine or operate with bag or guards removed. 4. Keeps hands and feet clear of ALL inlet and discharge openings. 5. Do not operate with hose cap, bag, or hose removed. 6. Do not operate during excessive vibration! 7. Follow engine manufacturer operating and maintenance instructions. 8. Inspect machine and work area before starting unit. 9. Installation of debris bag- Make sure strap is tight and well secured. 10. Be sure zipper is closed before starting engine. Your Billy Goat is shipped from the factory in one carton, completely assembled except for the debris bag, and wheels. On models KD50C and KD55CKW the handle must be assembled. 1. READ operator's instructions. Assemble wheels and handle securely in place. Do not over tighten. 2. UNFOLD the debris bag 1 and place mouth of bag over debris deflector and onto discharge outlet. Close zipper before starting engine. 3. TIGHTEN STRAP SECURELY to hold bag on discharge outlet. 4. ATTACH upper bag hanger straps by sliding grommet over rubber stud and on upper handle after handle is locked in place. DUST IS THE GREATEST CAUSE OF LOST VACUUM! SHAKE BAG WELL AFTER EACH EMPTYING. RUN ENGINE AT HALF THROTTLE FOR FIRST HALF HOUR TO CONDITION NEW MAINTENANCE 1. ENGINE: See engine manufacturer instructions. 2. Inspect machine before starting unit. 3. Maximum vacuum: Maintain by emptying bag before it fills completely. Dust will block pores of bag and reduce vacuum. Stop motion and shake bag down without removing or stop machine and remove bag to shake free of dust. You may wash felt bags. REPLACE SPARK PLUG WIRE, GUARDS, BAG, CAPS AND/OR HOSE BEFORE STARTING ENGINE. PUT OIL I...

Herunterladen

Geben Sie zwei Ziffern: