Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Billy Goat Dateigröße: 215.97 kb Dateiname: Unterrichtssprache:

Nozzle height ^ too high or too low . Hbæ lot cap missing. Clcggæl nozzle or œhaust. Excessive quantity of debris. Clean d^>ris bag. Shake bag clean or wash. Adjust nozzle height. Check for hose kit cap. Unclog nozzle or œhaust (see page 5). Allow air to fœl with o^ris. Abnormal vibration. Loose or out of balance impeller or loose ^gine. Check impeller and replace if ræuiræL Check Engine. Engine will rot s^art. Stop aitch off (tinea only). Throttle in off position. Engine not in full choke position (Honck only) . Out of gaæline. ESad or old gaæline. Spark Plug wire Dirty air cleaner. Check stop switches, throttle, choke position and gasoline. Connæt ^ark plug wire. Clean or r^>lace air cleaner. Cr contact a qualifié! service person. Engine is lockæl, will net pull o^ar. Debris lockæl in impeller. Engine problem. See page 5, Contact an ^gine servicing dealer for ^gine probl^s Nozzle scrapes ground in lowe^. height siting. Nozzle height out of adjustment. Adjust nozzle height. (fee Nozzle height fine adjustment for hard surface use on page 5). Engine Service and Warranty Contact your nearest engine manufacturer's authorized servicing dealer. 21 Serial Plate Record your machine model, serial number and date-of-purchase and where purchased 96 BiLLV ap GOATT INDUSTRIES.INC " I V ^ ~ | «J lOCI'i ç laffarcnn Df~t D/iv "inft 1803 S. Jefferson P.O. Box 308 Lee's Summit, Mo. 64063 / USA (816) 524-9666 FAX (816) 524-6983 CD 'pA 109 Operator r T Unit (weight) Engine Power Purchase Date_ Purchased from- 22 WARRANTY PROCEDURE Please fill in the WARRANTY CARD and send the upper part to Billy Goat. The WARRANTY terms are stated on the lower part which remains with the user. Whenever a Billy Goat Machine is faulty due to a defect in material and / or workmanship, the owner should make a warranty claim as follows: The Machine should be taken to the dealer from whom it was purchased or to an authorized Billy Goat dealer. The owner should present the remaining half of the Warranty Registration Card, or, if this is not available, the invoice or receipt. The Warranty Claim will be filled in by the authorized Billy Goat Dealer, who will send it with the faulty part to Billy Goat headquarters. The Quality / Service department at Billy Goat headquarters will study the claim and parts and will notify their conclusions. The decision by the Quality / Service department at Billy Goat headquarters to approve or reject a Warranty claim is final and binding. Note: To process a Warranty Claim, it is necessary to quote the Model & Serial number who are printed on the Billy Goat Serial Plate. BiLLV GOAT INDUSTWESINC BILLY GOAT INDUSTRIES INC. PO. BOX 308 (1803 S JEFFERSON LEE'S SUMMIT, MO. 64063 / USA PHONE: 816-524-9666 FAX: 816-524-6983 Part No. 890255 Page 8 of 8 Form No. F021695C Model kW @ kg lbs...

Herunterladen

Geben Sie zwei Ziffern: