Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Bissell, modell 1694

Hersteller: Bissell
Dateigröße: 1.03 mb
Dateiname:

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

The brush should also rotate freely when the silver motor shaft is turned. Turn the machine right side up and replace the Tank-in-Tank and belt access door. Assembly is now complete. If you have any questions, or are having trouble installing your replacement pump belt, please call BISSELL Consumer Services at 1-800-237-7691. 1. 2. 3. 5. 6. 4. 7. 8. To Install The Replacement Pump Belt 1. 2. 3. 4. 5. 6. 7. 12 With the unit still on its side, loop one end of the replacement Pump Belt around the Red Pump Pulley and then the other end around the silver motor shaft. Do not twist the replacement pump belt. Re-install the "toothed" Brush Belt first onto the Red Pump Pulley and then onto the toothed end of the Brush. Re-install the brush into the base of the unit. Place the black brush arm onto the Brush and slide black brush arm into original position. Re-install the Red Retainer Plate and Phillips head screw. Using your finger, gently spin the replacement pump belt on the silver motor shaft. If assembled correctly, the replacement Pump Belt should rotate freely around the silver motor shaft and drive pulley without obstruction. The brush should also rotate freely when the silver motor shaft is turned. Turn the machine right side up and replace the Tank-in-Tank and belt access door. Assembly is now complete. If you have any questions, or are having trouble installing your replacement pump belt, please call BISSELL Consumer Services at 1-800-237-7691. 1. 2. 3. 5. 6. 4. 7. 8. To Install The Replacement Pump Belt 1. 2. 3. 4. 5. 6. 7. ug310-5907_1692-1694_205.indd 12 4/18/05 9:20:05 AM Troubleshooting Reduced Spray Or No Spray. Possible Causes 1 2 4 5 3 Bladder may be empty. 1 The Lint Screen may be clogged. Tank-in-Tank may not be seated properly. Pump may have lost prime. The Pump Belt may be broken. Lift Here Insert Screwdriver Blade Here DirtLifter PowerBrush Does Not Turn. Possible Causes 1 The Brush Belt or Pump Belt may be broken. 1 breakage. If broken, refer to pages 11-12. Remedies Turn power OFF; refill tank with hot tap water. Clean out Lint screen page 7. Turn power OFF; remove tank and reseat tank. Turn power OFF; after 1 minute, turn ON and depress Spray trigger. Turn power OFF and unplug from the outlet. To check if a Pump Belt has broken, you will need a flat head screwdriver. Insert the blade end into the lower slot of the Belt Access door to release the lower snap. If necessary, insert the blade end into the upper slot to release the upper snap. Examine the belt for breakage. You should be able to see the Pump Belt looped around the motor shaft. If it is broken or missing, please refer to the part numbers and descriptions on page 15 before calling Consumer Services. Complete installation instructions will accompany the replacement belt. Remedies Turn power OFF and unplug from the outlet. To check if a Brush Belt has broken, you will need a flat head screwdriver. Insert the blade end into the lower slot of the Belt Access door to release the lower snap. If necessary, insert the blade end into the upper slot to release the upper snap. Examine the belt for 13 2 45 3 WARNING: To reduce the risk of fire, electric shock or injury, unplug appliance from outletbefore servicing. ug310-5907_1692-1694_205.indd ug310-5907_1692-1694_205.indd 13 4/18/05 9:20:06 AM 13 4/18/05 9:20:06 AM ___________________ NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim. See "About Your Warranty" on page 16 for details. BISSELL Consumer Services For information about repairs or replacement parts, or questions about your warranty, call: BISSELL Consumer Services 1-800-237-7691 Monday - Friday 8 a.m. — 10 p.m. ET Saturday 9 a.m. — 8 p.m. ET Or write: BISSELL HOMECARE, INC PO Box 3606 Grand Rapids MI 49501 ATTN: Consumer Services Or visit the BISSELL website -When contacting BISSELL, have model number of unit available. Please record your Model Number: ___________________ Please record your Purchase Date: 1 14 PowerSteamer is not picking up solution and water. Possible Causes ReadyTools Dial may be at the wrong setting for cleaning job. Nozzle Window may not be properly attached. 2 Tank-in-Tank Lid is not properly installed. Tank-in-Tank is not properly seated. 4 Poor tool position. (Handheld attachments only) Tank-in-Tank has picked up the maximum dirty water. Thank you for selecting a BISSELL product. If you should happen to need assistance during assembly or operations, call 1-800-237-7691. Please do not return this product to the store 6 3 5 Troubleshooting (Continued) 1 2 3 4 5 6 Remedies Set ReadyTools Dial to either FLOOR CLEANING or TOOLS/PRETREAT. Make sure the two tabs on the back of the Floor Nozzle Window are inserted through the mating slots in the main housing. Reinstall if necessary. Reinstall lid; refer to The Basics section, page 6. Tank-in-Tank must be firmly seated to function. Remove and reseat Tank-in- Tank. Readjust angle; appl...