Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: LG Dateigröße: 396.83 kb Dateiname: Unterrichtssprache:

A replacement cover/carrier must be obtained from authorised electrical goods retailers. WARNING! Should it become necessary to replace the moulded on plug then the detective plug should be destroyed to avoid any possible shock hazard that could occur should such a plug be inserted into a 13 amp socket elsewhere in the house. How to Use Connecting the flexible hose Push the end of the head (1) on the flexible hose(2) into the attachment point on the vacuum cleaner. To remove the flexible hose from the vacuum cleaner, press on the button (3) situated on the head, then pull upwards. Assembling the tubes (depending on model) • Metal tube(4) - Fit together the two tubes by twisting slightly. • Telescopic tube(5) - Push spring latch(6) forward. - Pull out tube to required length. - Release spring latch to lock. • Telescopic tube(7) - Release locking knob(8) (turn clockwise). - Pull out tube to required length. - Turn locking knob anti-clockwise as far as it will go. Using the cleaning head and Acces-sory Nozzles(depending on model) Fit the large cleaning head onto the end of the tube. • The 2 position head (9) is equipped with a pedal(10) which allows you to alter its position according to the type of floor to be cleaned. Hard floor position (tiles, parquet floors...). Press on the pedal to lower the brush. Carpet or rug position. Press on the ped-al to lift the brush up. 4 • If your appliance is equipped with an automatic cleaning head(11) without pedal, it automatically adapts to the type of floor to be cleaned. • Upholstery Nozzle(12) For vacuuming upholstery, mattresses, etc. The thread collectors help to pick up the threads and fluff. • Dusting brush(13) For vacuuming picture frames, furniture outlines, books and other uneven objects. • Crevice Tool(14) For vacuuming in those normally inaccessible places i.e. reaching cobwebs, or down the side of a sofa! How to plug in and use Pull out the mains lead to the desired length and plug into the socket. Press button(15) to start the vacuum cleaner. To stop it press the button(15) again. Adjusting the power level (depending on model) • Suction capacity increases steplessly up to MAX.(17) • The flexible hose handle(18) has a manual air flow regulator(19) which allows you to briefly reduce the suction level. Park-System (20) For short breaks during vacuuming, for example to move a small piece of furniture or a rug, use the rPark-system jto support the flexible hose and cleaning head. • Slide the hook attached to the large cleaning tool into the slot on the rear of the appliance. Carrying and storage(21) When you have switched off and unplugged the appliance, press on the button(16) to automatically rewind the cord. You can move or store your appliance in a vertical position by sliding the hook on the large cleaning head into the clip on the underside of the appliance. Changing the dust bag The dust bag needs changing when the cleaner is set to maximum power an...

Herunterladen

Geben Sie zwei Ziffern: