Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Viking, modell VCWB300

Hersteller: Viking
Dateigröße: 1.67 mb
Dateiname: 0d9a0352-a1b7-4f63-b9d3-d18d3a7c46e1.pdf

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Showroom mode will be engaged. DISPLAY PANEL OPERATION Keyboard Entry Tone Indicates a pad was pressed, command read and accept. Zone Pad 1. Toggle between zones for set point temperature adjustment. Pressing immediately toggles from Top to mid to bottom, respectively that order. Entry tone will sound at each depression of pad. 2. Used in conjunction with “Higher Temp” and “Lights” pads to enter service mode. Press “Zone”, “Higher Temp” and “Lights” simultaneously for 5 seconds to activate service mode. 3. Used in conjunction with “Higher Temp” and “Lights” pads to exit service mode. Press “Zone”, and “Lights” simultaneously for 5 seconds to exit service mode. Normal operation will then resume. 4. In service mode toggles between zones. Pressing immediately toggles from Top to mid to bottom respectively that order. Lower Temp Pad 1. Lowers Temperature settings in 1 degree increments. Entry tone will sound at each depression of pad until desired temperature setting is achieved. 2. Activates charge mode – Press lower temp pad when in “service mode” to activate charge mode. Higher Temp Pad Raises temperature settings in 1 degree increments. Entry tone will sound at each depression of pad until desired temperature setting is achieved. 1. Used in conjunction with “Zone” and “Lights” pads to enter service mode. Press “Zone”, Higher Temp” and “Lights” simultaneously for 5 seconds to activate service mode. 2. Used in conjunction with “Zone” and “Lights” pad to exit service mode. Press “Zone”, “Higher Temp” and “Lights” simultaneously for 5 second to exit service mode. Normal operation will then resume. Lights Toggle between lights on when door open only and lights always on. Warning: May affect temp regulation of Wine Cooler. Entry tone will sound at each depression of pad. 1. Used in conjunction with “Zone” and “Higher Temp” pads to enter service mode. Press “Zone”, Higher Temp” and “Lights” simultaneously for 5 seconds to activate service mode. 2. Used in conjunction with “Zone” and “Higher Temp” pads to exit service mode. Press “Zone”, “Higher Temp” and “Lights” simultaneously for 5 seconds to exit service mode. Normal operation will then resume. Display Pad 1. Activates control panel. Pressing button for 2 seconds toggles the display on/off. Entry tone will sound at after 2 seconds of pad depression. 2. Activates Holiday Mode. Pressing button for 15 seconds toggles the holiday mode on/off. 3. Used in conjunction with “alarm” pad to toggle between “F” Fahrenheit and “C” Celsius temperature reading. Press and hold “Alarm” and “Display simultaneously for 10 seconds to change from one to the other (“F” or “C”) 4. Used in conjunction with “Alarm” button, temperature can be displayed in either Deg F (default) or in Deg C. It can be changed from one to the other by pressing and holding both the “Display” and the “Alarm” buttons simultaneously for 5 seconds. The display will show “F” or “C”. Alarm Toggles between alarm on and off. By pressing the alarm pad for 2 seconds. 1. Activates alarm feature. 2. Deactivates alarm feature. 3. Disables alarm in the event of a high temperature condition. 4. Used in conjunction with “Display” button temperature can be displayed in either Deg F or in Deg C. It can be changed from one to the other by pressing and holding both the “Display” and the “Alarm” buttons simultaneously for 5 seconds. The display will show “F” or “C”. Wine Cooler Leveling: A. Lift the wine cooler off the rollers, adjust to the desired height and level wine cooler by using a 5/16” hex head wrench. (Refer to Figure at the right). 1. To raise right side rear, rotate the right side rear hex rod Clockwise. 2. To raise the left side rear, rotate the left side rear hex rod Clockwise. 3. To raise the right side front, rotate the right side front hex rod Clockwise. 4. To raise the left side front, rotate the left side front rod Clockwise. NOTE: DO NOT use an electric driving device. Over tightening can cause damage. B. Align wine cooler with sides of cabinets by adjusting leveling legs. Rotate leveling legs until firmly in place against floor. C. To secure wine cooler, raise until compartment cover is firmly seated under the soffit or anti-tip boards. LEVELING ADJUSTMENTS DOOR STOP ADJUSTMENT 1. Using a 3/16” allen wrench, remove door stop pin located in bottom hinge. 2. The pin is factory set 110°. For 120° swing, move the pin to the utmost forward stop hole. For 90° swing, move the pin to the utmost rear stop hole. HINGE ADJUSTMENT 1. Using 3/16” allen wrench, remove the door stop pin located in bottom hinge. 2. Using the height adjustment shim as a wrenching device, rotate the height adjustment bushing counterclockwise to raise or clockwise to lower the location of the door. 3. When proper adjustment is reached, align shim with door stop pin holes and replace door stop pin. Firmly tighten pin in place. DIAGNOSTIC CHECK POINTS (Rfer to Wiring Schematic on Page 19) Number DescriptionA E1 Display Board Send 1 +5Vdc 2 dat...