Stimmen - 5, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
Ultra-Microfiber Pads for HAAN® Floor Sanitizing Steam Mop What is an ultra-microfiber? An ultra-microfiber is a textile fiber that is thinner and more absorbent than a microfiber (1.0dtex) pad typically used with steam mops. Specifically, to be defined as an ultra-microfiber, it should be less than 0.2dtex. The Ultra-Microfiber pad by HAAN® Corporation is made of .17dtex ultra-microfibers. How to Use Ultra-Microfiber Pads 1. Please make sure that a completely dry pad is used. 2. As high temperature steam passes through a pad to contact the floor to kill germs, molds, mites and to provide a certain amount of water necessary for cleaning, it is natural that the pad gradually absorbs moisture. After a certain length of time, the pad repels water and becomes damp. 3. To keep the floor clean and dry, replace the pad when it is dirty. 4. Only remove pad from unit when not in use and steam is not being emitted. How to Clean and Store 1. Hand wash or machine wash the ultra-microfiber pad in cold water on the delicate cycle with a mild detergent. (Do not use a fabric softener) 2. Using a washing machine may shorten the lifespan of the pads. 3. We recommend air drying the ultra-microfiber pad for 24 hours, but they could be dried in a dryer on a low heat setting. Chlorate bleach Hanger Lightly 5 Product Assembly & Parts A 1 Handle Assembly: Line up groove & insert into unit. 5 B 6 7 8 Base Assembly: Insert screw as shown. Tighten using a flat-head screwdriver. If screw turns freely without “gripping” the insert threads, apply additional pressure when turning. 2 9 3 10 4 11 Floor Setting Indicator Light: Ideal for ceramic, stone, tile and other durable floors. Perfect for sealed hardwood, laminate, bamboo and other delicate floors. 12 13 17 16 15 14 6 1. Handle 2. Floor Setting Control 3. Floor Setting Indicator Light 4. Steam Power Switch 5. Telescopic Handle 6. Handle Length Adjustment Button 7. Storage Hook (rotates 360.) 8. Main Body Assembly Screw 9. Power Cord 10. Water Tank Release Button 11. Detachable Water Tank 12. Power Cord Organizer (bottom) 13. Assembly Screw (x1) Located in Fresh Rinse Bag 14. Floor Protector / Resting Mat 15. Carpet Glide 16. Ultra-microfiber Pads (x2) 17. Fresh Rinse Lime & Scale Remover (x12) Helpful Hint: To extend the life of your Ultra-Microfiber Pads, always place your unit on the floor protector/resting mat while the unit heats up. Attach the Ultra-Microfiber pad when the unit is ready to use. Helpful Hint: When using the Floor Sanitizer with the Carpet Glide it will not lift all set-in stains from your carpet, our patented Ultra-microfiber pad may be used to act as a “blotter” for removing most fresh, wet spills and stains. Before Using Your Floor Sanitizer Be sure to read ALL instructions and warnings before using your Floor Sanitizer. Warning Your floor sanitizer is designed to clean hard floor surfaces that will withstand high heat. Do not use on unsealed wood or unglazed ceramic floors. On surfaces that have been treated with wax or some no-wax floors, the sheen may be removed by the heat and steam action. It is always recommended to test an isolated area of the surface to be cleaned before proceeding. We also recommend that you check the use and care instructions from the floor manufacturer. Helpful Hint: Helpful Hint: When heated, never leave the appliance in one spot on any surface for any period of time. Always place your Floor Sanitizer on the Floor Protector/Resting Mat when stationary. Always empty water from water tank after use. To ensure optimum product function use Fresh Rinse™ once a month. 7 Before Using Your Floor Sanitizer cont. CAUTION Use only a heavy duty extension cord rated for 15 amps minimum – DO NOT use an ordinary extension cord. IMPORTANT This product is NOT for space heating purposes. CAUTION HAAN® floor care products emit steam at 212. to sanitize the area of use. This means that the steam head, Ultra-microfiber pads and carpet glide get very hot during use. Care should be taken when using this appliance and DO NOT touch components of this machine during use except in the approved manner as outlined in this manual. Using Your Floor Sanitizer - Operating Instructions 3 1 2 Press Water Tank Release button and remove water tank. Turn Cap counterclockwise to Remove. Fill tank with water. Assemble unit and place on Floor Protector / Resting Mat. 5 4 6 Gently place unit on Ultra- microfiber pad. You are now ready to steam clean. Press ON/OFF button. Wait 20 seconds for unit to heat up. Unit may vibrate while heating. Tighten cap. Insert tank (cap down) until it “clicks”. 8 7 9 8 Tilt handle at a 45. angle. Push and pull slowly across the floor to clean thoroughly. When done, push ON/OFF button. Place unit with Ultra-microfiber pad attached onto Floor Protector / Resting Mat. Allow to cool down for five (5) min. IMPORTANT: Vibration Sound 10 While the unit is turned off, air builds up in the water pump line. This is a common occurrence. When the unit is...