Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Fotos und technische Daten Dyson DC35 |
Anleitung Zusammenfassung
Leave it to cool for at least an hour and check for blockages before restarting. • Fine dirt such as flour or plaster dust should only be vacuumed in very small amounts. • Before vacuuming highly polished floors, such as wood or lino, first check that the underside of the floor tool and its bristles are free from foreign objects that could cause marking. • To avoid damaging the floor do not push hard with the floor tool. Do not leave the cleaner head in one place on delicate floors. • On waxed floors the movement of the cleaner head may create an uneven luster. If this happens, wipe with a damp cloth, polish the area with wax, and wait for it to dry. • Consult your flooring manufacturer’s recommended instructions before vacuuming and caring for your flooring, rugs, and carpet. The brush bar on the Dyson vacuum can damage certain carpet types and floors. Some carpets will fuzz if a rotating brush bar is used when vacuuming. If this happens, we recommend vacuuming without the motorhead and consulting with your flooring manufacturer. • Do not use any lubricants, cleaning agents, polishes or air fresheners on any part of the Dyson vacuum or charger. • This Dyson vacuum is fitted with a thermal cut-out. If any part of the Dyson vacuum becomes blocked the machine may overheat and automatically shut off. If this happens, switch ‘OFF’ the Dyson vacuum and allow to cool before attempting to check the filter or for blockages. Clear any blockages before restarting. • Store the Dyson vacuum indoors. Do not use or store this Dyson vacuum below 37.4°F (3°C). Ensure that the Dyson vacuum is at room temperature before operating. TROUBLESHOOTING – DYSON VACUUM CLEANER Charged Flashing light – less than one minute of charge remaining/ fully discharged Rapidly flashing light – too cold/too hot. Do not use Filter missing/filter fitted incorrectly EMPTYING THE CLEAR BIN CAUTION: • Switch ‘OFF’ the Dyson vacuum and disconnect from the charger before emptying the clear bin. • To make emptying the clear bin easier, it is advisable to remove the wand and motorhead. • Empty as soon as the dirt reaches the level of the MAX mark – do not overfill. • To release the dirt, push the red button at the side of the clear bin as shown. Emptying into a bag is recommended for allergy sufferers. • Do not use the Dyson vacuum without the clear bin in place. • To minimize dust/allergen contact when emptying, encase the clear bin tightly in a plastic bag and empty. Remove the clear bin carefully and seal the bag tightly, dispose as normal. CLEANING THE CLEAR BIN CAUTION: To remove the clear bin, push the red bin release button on the underside of the Dyson vacuum as shown. • Clean the clear bin with cold water only. • Ensure the clear bin is completely dry before replacing. PLEASE NOTE: • Do not use detergents, polishes or air fresheners to clean the clear bin. • Do not put the clear bin in a dishwasher. • Clean the shroud with a cloth or dry brush to remove lint and dirt. WASHING YOUR FILTER CAUTION: • Switch ‘OFF’ and disconnect from charger before removing the filter. PLEASE NOTE: This Dyson vacuum has one filter, located as shown. It is important to check your filter regularly and wash with cold water at least every month according to instructions, to maintain performance. The filter may require more frequent washing if vacuuming fine dust or if used mainly in ‘MIN’ power mode. • After washing please leave for 12 hours to dry completely before refitting to the Dyson vacuum. • Do not use detergents to clean the filter. • Do not put the filter in a dishwasher, washing machine, tumble dryer, oven, microwave or near an open flame. LOOKING FOR BLOCKAGES CAUTION: • Switch ‘OFF’ the Dyson vacuum and disconnect from the charger before looking for blockages. Failure to do so could result in personal injury. • Beware of sharp objects when clearing blockages. • Refit all parts of the Dyson vacuum securely before using. PLEASE NOTE: • Clearing blockages is not covered by your Dyson vacuum’s limited guarantee. If any part of your Dyson vacuum becomes blocked, it may overheat and then automatically shut off. • Switch ‘OFF’ and unplug your Dyson vacuum and leave to cool down. Clear blockage before restarting. CLEARING BRUSH BAR OBSTRUCTIONS CAUTION: • Switch ‘OFF’ the Dyson vacuum and disconnect from the charger before clearing brush bar obstructions. Failure to do so could result in personal injury. If your brush bar is obstructed, it may shut off. If this happens you will need to remove the brush bar as shown and clear any obstructing debris. • Remove the brush bar by using a coin to loosen the screw marked with a key. Remove the obstruction. Replace the brush bar and secure it by tightening the screw. Ensure it is fixed firmly before operating the Dyson vacuum. • Take care if coming into contact with the carbon fiber brushes, as they may cause minor skin irritation. Wash your hands after handling the brushes. • Beware of sharp objects when clearing blockag...