Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
The Mio R-2 can transmit in 38 KHz IR, 455 KHz IR, 418 RF (1-way) (FG147-418), 433 RF (1-way) (FG147-433), or 38 KHz and one of the RF frequencies. Selecting a source device sends a command to the master and runs predetermined events associated with that source. Selecting a macro will run predefined events, which might not be associated with sources listed, then return the device to its previous mode. You need KeypadBuilder to properly program this device. The application and documentation are available from FIG. 1 The Mio R-2 Device 39 1 2 3 4 5 6 7 8 910 3840 11 12 1315 14 16 26 28 41 43 44 42 45 Power Transmission Mode Current Menu Battery Meter Custom Macro Buttons Custom Mode Options 1 - Power 14 - Channel Down 2 - Guide 15 - Last Viewed 3 - Exit 16 - Mute 4 - Menu 26 - Input 5 - Information 28 - Enter 6 - Move Up 38 - Stop 7 - Move Down 39 - Record 8 - Move Left 40 - Pause 9 - Move Right 41 - Slow Reverse 10 - Select 42 - Play 11 - Volume Up 43 - Slow Forward 12 - Volume Down 44 - Rewind 13 - Channel Up 45 - Forward Numeral Keypad Touch And Tilt Sensor The Mio R-2 wakes up upon touching either the chrome side rails or pressing a button. When holding the remote and it times out, you can reawaken the device by tilting it. Errant jostling such as a bumped table will not wake the device unless you are holding it. Specifications The Mio R-2 device specifications are as follows: Mio R-2 (FG147-418/433) Specifications Battery 4 AAA Alkaline Batteries (5 hours battery life) Transmission Frequencies • AMX 38 KHz/455 KHz IR• 418 RF (1-way) (FG147-418) • 433 RF (1-way) (FG147-433) Transmission Range (distance) with Mio IR Receiver • 100 feet at 38KHz (IR) • 50 feet at 455KHz (IR) • 300 feet at 418 (RF) • 200 feet at 433 (RF) Transmission Range (angle) • 140 degrees (+/-70° from perpendicular) horizontally from an axisextending from the end of the remote. (IR) • 40 degrees (+/-20° from perpendicular) vertically from an axisextending from the end of the remote. (IR) Top Components • LED - blue backlit buttons indicate device is awake • Display (OLED) - 128 x 32 pixels, active area is 29.42mm x 7.98mm• Pushbuttons - the power button is red backlit; the rest are blue backlitbuttons. 45 buttons; 9 custom buttons (3 macro and 6 device). Rear Component • Programming Port - 2.5 mm stereo female conductor jack•Battery Door• Rechargeable Battery Connection Mio R-2 (FG147-418/433) Specifications (Cont.) Dimensions (HWD) 9.50 x 2.00 x .74 (241.3 mm x 50.8 mm x 18.80 mm) Supported Languages: • English•French •German •Greek • Italian • Japanese •Korean • Mandarin Chinese • Portuguese• Russian • Spanish Weight • .45 lbs (20 kg) without batteries • .55 lbs (25 kg) with batteries Operating Environment: • Operating Temperature: 0° to 50° C (32° to 122° F) • Storage Temperature: -10° to 70° C (14° to 158° F) Other AMX Equipment • DB-9 extension cable (FG10-727) • Programming Cable - a 3 wire, 2.5 mm stereo jack (FG10-817) • Custom engraving (FG147-01) • Mio-RCC Kit (FG147-03K) • Mio-RCC Charging Base (FG147-02) • Mio-RBP Rechargeable Lithium Ion Battery (FG147-10) • AXR-RF 418 MHZ RF Receiver (FG782-418) • AXR-RF 433 MHZ RF Receiver (FG782-433) Installing Your Custom Buttons 1. Flip and turn the Mio R-2 device so that the buttons are facing away from you and the device is upside down. 2. Holding the device in both hands, place your thumbs on the battery door and push up to slide the battery door free. 3. Unscrew the 6 screw points indicated in FIG. 2. FIG. 2 Internal Mio R-2 Components 6 Screw Points Programming Jack 4. Turn the unit over so the buttons are facing you. 5. Lift the top assembly away from the PCB. 6. If necessary, push out the standard buttons from the front of the top assembly. 7. Drop on your custom button pad and verify the alignment with the guide posts on the PCB. 8. Place the top assembly back down on the PCB and return the unit over, exposing the 6 screw points. 9. Tighten the 6 screw points. 10. Place the battery door back on the device, slide to lock it in place. Inserting Batteries into The Mio R-2 To install your 4 AAA batteries into the Mio R-2 device: 1. Flip and turn the Mio R-2 device so that the buttons are facing away from you and the device is upside down. 2. Holding the device in both hands, place your thumbs on the battery door and slide the battery door free. 3. Insert the batteries as indicated inside the battery compartment. 4. Place the battery door back on the device, slide to lock it in place. Battery Low Indicator When the battery charge level is too low to sustain continuous operation, the LCD flashes, "Battery Low" and the device shuts down. Programming The Mio R-2 Using KeypadBuilder Most functionality of the Mio R-2 is handled using the application, KeypadBuilder. Go to for the KeypadBuilder Instruction Manual. There are a select number of Serial Commands the Mio R-2 recognizes. For a full list and descriptions, consult the Mio R-2 Instruction Manual on www.amx...