Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
3 2 Getting started.....................................4-9 2.1 Inserting the batteries............................ 4 2.2 Testing the universal remote control.........................................................4-5 2.3 Setting up the universal remote control.........................................................5-9 3 Using the universal remote control................................................. 9-11. 3.1 Keys and functions............................9-11 3.2 Resetting a key to its original function.........................................................11 4 Service and support.......................12-14. 4.1 Frequently asked questions.......12-14 4.2 Need help?.........................................12-13. FCC Compliancy.....................................14 Helpline........................................................29 Brand list..............................................30-41 1 Your SRP2004WM Congratulations on your purchase of the Philips SRP2004WM universal remote control. After setting up the remote control you can operate up to 4 different devices with it. Simple Setup Improved with Philips patented (pending) Simple Setup technology, the SRP2004WM can be set up easily for TV, DVD player / recorder, VCR and all common Cable, Satellite and other set top boxes, such as DirecTV, Comcast, AT&T, Verizon, Time Warner, Scientific Atlanta, Tivo and many more. Simply follow the instructions in chapter 2.3 to set up the remote control for your devices. Glow keys The remote control glow keys (- VOL +, - CH +, ENTER. (-) and the numeric keys) light up in the dark, enabling easy use of the remote control, even in a dimly lit room To fully benefit from the support that Philips offers, register your product at Y our SRP2004WM English SRP2004WM_17__Manual_80_210.indd 3 25-09-09 4 EN 2 Getting started 2.1 Inserting the batteries • Insert 2 AAA type batteries, noting the + and - configuration in the battery compartment. Note When replacing the batteries, all user settings will be retained in the remote control memory for 5 minutes. 2.2 Testing the universal remote control It is advised to test whether your device(s) already respond(s) to the SRP2004WM before setting it up (see chapter 2.3). The example below instructs you how to do this for your TV. You can repeat the same steps for other devices (DVD player/recorder, Cable/Satellite box and VCR) which you want to operate using the SRP2004WM. Example: testing the universal remote control on your TV: 1 Switch ON your TV manually or use the original remote control for this. Tune to channel 1. 2 Press the device selection key to select TV. • The red Setup light lights up. • If the light does not light up, check whether the batteries are properly inserted (see chapter 2.1). SRP2004WM_17__Manual_80_210.indd 4 25-09-09 EN 5 3 Check whether the keys that you need for operating your TV are working. For an overview of the keys and their functions see chapter 3.1. • If the TV responds as it should to all of the key commands, the SRP2004WM is ready for use. • If the device does not respond at all or not to all of the key commands, follow the instructions in chapter 2.3. 2.3 Setting up the universal remote control This is only necessary if your device does not respond to the SRP2004WM. If that is the case, the SRP2004WM does not recognize the brand and / or model of your device and you need to set up the remote control to do so. The example below instructs you how to do this for your TV. You can repeat the same steps for other devices (DVD player/recorder, Cable/ Satellite box and VCR) which you want to operate, using the SRP2004WM. The remote control can be set up to operate any 4 of the following devices: Device name Description TV Traditional TV, flat screen TV and projection TV, TV part of TV / VCR, TV / VCR / DVD and TV / DVD combos DVD DVD player / recorder (DVDR), DVD / Hard Disk Drive combination (DVDR-HDD), Blu-Ray player, High Definition DVD player (HD-DVD), DVD part of TV / DVD, TV / VCR / DVD and VCR / DVD combos Getting star ted English SRP2004WM_17__Manual_80_210.indd 5 25-09-09 6 EN CBL/SAT Cable box, satellite receiver, Internet Protocol TV (IPTV), Free To Air TV, High Definition Television decoder (HDTV) and Tivo VCR Video cassette player / recorder, Personal video recorder (PVR), VCR part of TV/VCR, TV/VCR/DVD and VCR/DVD combos Example: setting up the universal remote control to operate your TV: 1 Switch ON the TV manually or use the original remote control for this. Tune to channel 1. 2 Press and hold the device selection key for 5 seconds until the red Setup light remains lit . The remote control is now in setup mode. 3 Look up the 4-digit code for your brand in the brand list at the back of this user manual. A 4-digit code is shown for each brand. Use the digit keys to enter the code for your brand (e.g. Philips, ). • If the red Setup light turns off, an invalid code was entered. In this case, try again. 4 Aim the...