Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: Philips
Dateigröße: 2.94 mb
Dateiname:
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Anleitung Zusammenfassung
3 2 Getting started ................................................................. 3-6 2.1 Inser ting the batteries ............................................................... 3 2.2 Setting up the universal remote control ....................4-6 2 3 Using the universal remote control............................. 6-8 3.1 Buttons and functions............................................................6-7 3.2 Resetting a button to its original function .................7-8 4 Service and support ...................................................... 8-10 4.1 Frequently asked questions .............................................8-10 4.2 Need help? ....................................................................................10 Helpline ...........................................................................................10 Brandlist................................................................................... 11-21 Information to the consumer..........................................22 Compliance with EMF.............................................................22 Recycling and disposal.............................................................22 Batter y information ..................................................................22 1 Your SRP1101 Congratulations on your purchase of the Philips SRP1101 4 universal remote control. After setting up the remote control you can operate the most-used functions of almost any brand of TV. 6 To fully benefit from the suppor t that Philips offers, register your product at: 2 Getting started 2.1 Inserting the batteries • Inser t 2 AAA type batteries, noting the + and - configuration in the batter y compar tment. Getting started English Note When replacing the batteries, all user settings will be retained in the remote control memor y for 5 minutes. 2 EN 3 4 EN EN 5 2.2 Setting up the universal remote control The remote control can be set up to operate traditional TV, flat screen TV and projection TV, TV part of TV/VCR, TV/VCR/ DVD and TV/DVD combos. 1 Switch ON the TV manually or use the original remote control for this. Tune to channel 1. 2 Keep buttons and pressed simultaneously for 5 seconds. • The green Setup light lights up. The remote control is now in setup mode. 3 Look up the 4-digit code for your brand in the brand list at the back of this user manual. A four-digit code is shown for each brand. Use the digit buttons to enter the code for your brand. • If the green Setup light turns off, an invalid code was entered. In this case, try again. 4 Aim the remote control at the TV. Press and hold the button. Release it immediately as soon as the TV switches off. • The remote control is now set up to operate your TV. • This step normally takes between 5 and 60 seconds. In extreme circumstances this step can take up to 15 minutes. 5 Switch ON the TV. Try out the buttons that you need for operating it. Try, for example, if the , and digit buttons function properly. • If a button does not work as expected, press and hold that button. Release it immediately as soon as it works. For more information, see chapter 2.2.1. 6 Keep buttons and pressed simultaneously for 5 seconds to finish setup. • When no button is pressed for 5 minutes or more, the remote control will exit setup mode, automatically saving all your settings. Note Tip Caution Warning! Danger! Important If you made a mistake: • Keep buttons and pressed simultaneously for 5 seconds to exit setup. The green Setup light turns off. • Restart from the beginning. • If the device does not respond at all or not to all of the button commands or if you cannot find the code for your brand, enter ‘9, 9, 9, 9’ in step 3 and continue with step 4. The remote control will now search its full database for a code that works with your TV. Full database search may take up to 15 minutes. 2.2.1 Improving buttons When correctly set up, the remote control should be able to operate your TV. However, when using the remote control for the first time it might occur that some buttons do not yet function as expected. In this case you can have the remote control search for alternatives. Note Tip Caution Warning! Danger! Note Improving buttons is not possible when the code was found during full database search (with code ‘9, 9, 9, 9’). During initial setup 1 Make sure that the TV is switched on. 2 Press the button that does not function, keep it pressed and immediately release it when the TV responds. Repeat this for every button that does not function. • If the button still does not function as expected, try pressing it again for a longer period of time. Getting started English 5 - 60 sec. 5-60 SEC. 5 sec. 5 sec. 6 EN EN 7 After initial setup 1 Make sure the TV is switched on. 2 Keep buttons and pressed simultaneously for 5 seconds. • The green Setup light lights up. The remote control is now in setup mode. 3 Press and hold the button that does not function and immediately release it when t...