Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Kohler Dateigröße: 57.29 kb Dateiname: Unterrichtssprache:

Bath whirlpool shall be made of cast iron with Safeguard® finish. K-772-Nl bath whirlpool shall have 6 Flexjets, 2 hp variable speed pump, 1.5 kW heater, back-lit user control, and pulsating neckjets with pillow. K-772-H2 bath whirlpool shall have 6 Flexjets, 1.5 hp variable speed pump, 1.5 kW heater, and back-lit user control. Bath whirlpool shall be UL listed. Bath whirlpool shall be less all trim. Bath whirlpool shall be Kohler Model K-772- - . We reserve the right to make revisions without notice in the design of fixtures or in packaging unless this right has specifically been waived at the time the order is accepted. Page 1 of 2 1019471-4-A PRISTINE® PRODUCT INFORMATION Fixture*: basin area top area weight Bathing well 42" (106.7cm) x 26" (66cm) 54" (137.2cm) x 32" (81.3cm) 460 lbs. (208.7kg) water depth capacity To overflow 15" (38.1cm) 70 gal. (265L) * Approximate measurements for comparison only. Product Pump Heater Voltage Frequency Amperage Neckjets 2 HP 1.5 kW 240 V 50/60 Hz 15 A w/o Neckjets 1.5 HP 1.5 kW 240 V 50/60 Hz 11 A REQUIRED ELECTRICAL SERVICE Dedicated circuit required, protected with Class A Ground-Fault Circuit-Interrupter (GFCI) or Earth-Leakage Circuit-Breaker (ELCB): Pump/control 220/240 V, 20 A, 50/60 Hz INSTALLATION NOTES Install this product according to the installation guide. Floor support under whirlpool must provide for a minimum of 1500 lbs. (680.4kg) Hot water supply should be 70% of capacity or greater. Installations will vary. 3-1/4" No change in measurements if connected with drain illustrated. (K-7161-AF or K-7161M-AF) Drop-in cut-out 58-1/2" (148.6cm) x 40-1/2" (102.9cm) Cut-out for undermount K-583 template Minimum acces...

Herunterladen

Geben Sie zwei Ziffern: