Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
You must subscribe to one of these services in order to use TABLE OF CONTENTS BEFORE YOU BEGIN .................................. 1 POWERING THE CALLER ID UNIT ................. 2 INSTALLATION ........................................... 4 OPERATION .............................................. 9 CHOOSING A LANGUAGE ........................ 9 TIME AND DATE SETTINGS ...................... 9 RECEIVING AND STORING CALLS ............ 10 DELETE AND REVIEW BUTTONS ............. 11 VERY IMPORTANT PERSON BUTTON ........ 12 DISPLAY CONTRAST ADJUSTMENT ......... 14 MESSAGE INDICATORS ......................... 15 TROUBLESHOOTING TIPS .......................... 16 GENERAL PRODUCT CARE ........................ 17 SERVICE ................................................ 18 LIMITED WARRANTY ................................ 21 THE LIGHTNING FLASH AND ARROW HEAD WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF "DANGEROUS VOLTAGE" INSIDE THE PRODUCT. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE EXCLAMATION POINT WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF IMPORTANT INSTRUCTIONS ACCOMPANYING THE PRODUCT. WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. SEE MARKING ON BOTTOM / BACK BEFORE YOU BEGIN PARTS CHECKLIST Make sure your package includes the following items: AC power supply Caller ID unit VIP DISPLAY REVIEW VERY IMPORTANT: The Caller ID feature of this product requires a subscription to Caller ID service from your telephone company. Telephone line cord Mounting Bracket MODULAR JACK REQUIREMENTS You need an RJ11 type modular jack, which is the most common type of pictured here. have a modular call your local phone company POWERING THE CALLER ID UNIT The unit can operate on batteries only, but you must use the AC power supply in order for the new call indicator light and the display backlighting to work. INSTALLING THE BATTERIES Install 4 AAA-size batteries to retain caller ID in the event of a power failure. Disconnect the line cords from the back and wait a few seconds for the unit standby. 1. Open the battery compartment on the door and sliding it arrow. 2. Insert 4 AAA-size batteries diagram in the battery 3. Replace the battery compartment door securely. 1 2 BATTERY INDICATOR If the battery icon appears in the display, you need to replace the batteries. USING THE AC ADAPTER You must use the AC power supply in order for the new call indicator light and the display backlight work. When using AC power, the batteries serve as a backup in the event of power failure. NOTE: Only use the Thomson 5-2408 AC adapter that came with this unit. Using other adapters may damage the unit. INSTALLATION You can set the unit on a tabletop or mount it on the wall. IMPORTANT INSTALLATION INFORMATION • Never install telephone wiring during a lightning storm. • Never touch uninsulated telephone wires or terminals, unless the telephone line has been disconnected at the network interface. • Use caution when installing or modifying lines. TABLETOP INSTALLATION 1. Connect the telephone line cord to the jack on the back of the unit marked TO LINE, and to the modular wall jack. 2. Connect your phone’s line cord to the jack on the back of the unit marked TO PHONE. 3. Insert the AC adapter into the jack marked 9 V into the back of the unit and to an AC power outlet. If you want the unit to sit up at an angle laying flat, attach the mounting bracket the unit before connecting the NOTE: Only use the Thomson 5-2408 AC adapter that came with this damage the unit. WALL MOUNT INSTALLATION Use the mounting accessories included with this unit. 1. Hold the mounting bracket against the wall and mark the mounting screw positions on the wall with a pencil. 2. Insert the anchor screws and install the mounting bracket on the wall. 3. Connect the telephone line cord to the jack back of the unit marked TO LINE, and to modular wall jack. 4. Connect your phone’s line cord to the jack on the back of the unit marked TO PHONE. 5. Insert the AC adapter into into the back of the unit outlet. 6. Securely mount Canestrare Graphics HB 1 2 6 3 4 5 ANSWERING MACHINE INSTALLATION The answering machine must be set to answer calls after at least 2 rings to properly receive caller ID information. To use your caller ID unit with an answering machine: 1. Plug a telephone line cord into the modular jack and into the jack on the back of the unit marked TO LINE. 2. Plug another telephone line cord into the on the back of the unit marked TO PHONE into the answering machine. 3. Plug a third telephone line cord answering machine and into 4. Insert the AC adapter into DC into the back of the power outlet. TWO-LINE SYSTEM INSTALLATION You must use two caller ID units if you want to use caller ID for both lines. You must also purchase a triplex adapter. 1. Plug the ...
Dieses Handbuch ist für folgende Modelle:Telefonanlagen - 347A8359-0001 (155.06 kb)