Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
They are Melody 1 to 8 for line 1 and line 2 respectively. From the Sound Setting Menu: 1. Press the VOL (+ or -) button to scroll to the Ring Tone. 2. Press SELECT soft key. 3. Use the VOL (+ or -) button to scroll to your selection and use the DIR or CID button to toggle between L 1 and L 2. The default setting is Melody 1 for both lines. 4. Press SELECT soft key to save your selection and the screen displays "Saved". Ring Volume There are 5 Volume levels and OFF for your selection. The Ring Volume can be set individually for each line. From the Sound Settings Menu: 1. Press the VOL (+ or -) button to scroll to the Ring Volume. 2. Press SELECT soft key. 3. Use the VOL (+ or -) button to scroll to your selection and use the DIR or CID button to toggle between L 1 and L 2. The default setting is VOL 3. 4. Press SELECT soft key to save your selection and the screen displays "Saved". Key Tone From the Sound Settings Menu: 1. Press the VOL (+ or -) button to scroll to the Key Tone. 2. Press SELECT soft key. Use the VOL (+ or -) button to select On or Off. 3. Press SELECT soft key to save your selection and the screen displays "Saved". Telephone Operation Making Calls with the Cordless Handset 1. Press the Talk button, the unit will pick the first available line for you. -OR- Press Line 1 or Line 2 soft key to select a line you wanted. 2. Wait for a dial tone then dial the phone number. 3. Press the End button when finished. 20 Telephone Operation Making Calls in the Speakerphone mode (from the base) 1. Press the Speaker button (in base), the unit will pick the available line for you. If both lines are available, Line 1 will be used first. -OR- Press Line 1 or Line 2 button on the base to select the line, and the base's speaker will activate. 2. Wait for a dial tone then dial a phone number. 3. Press the Speaker button when finished. NOTE: After pick the line, the call timer starts to run until all the calls are hung up. The timer serves for both 2 lines. Making Call in the Speakerphone mode (from the handset) 1. Press the Speaker button to activate the speakerphone on the first available line. -OR- Press the LINE 1 or LINE 2 soft key to select a specific line. The handset will activate the ear piece. 2. Press the Speaker button to switch to speakerphone mode. 3. Wait for a dial tone then dial the phone number. 4. Press the End button when finished. Making Calls with the Optional Headset 1. Plug the headset into the Headset jack on the side of the base or side of the cordless handset. 2. Adjust the headset to rest comfortably on top of your head or over your ear. 3. Move the microphone to approximately 2 to 3 inches from your mouth. 4. For the base, press the Headset button on base and the phone automatically selects first available, if both lines are available, Line 1 will be used. 5. For the cordless handset, press the Talk button. 6. Wait for a dial tone, and then dial the phone number. 7. Press Headset button (on base) or End button (on handset) when finished. A CAUTION: Use only Thomson Inc. 5-2425 headset that is compatible with this unit. NOTE: If the headset is not connected (or if not completely inserted into headset jack), an error tone is heard when the Headset button is pressed. 21 Telephone Operation Pre-dialing 1. With the phone idle, manually enter the telephone number. The screen displays the telephone number. 2. Press the DIAL soft key (on base only), Speaker button, Talk button (handset only), or Line 1 or Line 2 button to take a line, and then the telephone number will be dialed out. Answering a Call For cordless handset: 1. Press the Talk button to answer the call in receiver mode, -OR- 2. Press the Spk button to answer the call in speakerphone mode, -OR- 3. Press the corresponding LINE soft key to answer the call in receiver mode. 4. When finished, press END button. For the base: 1. Press the Speaker button to answer the call in speakerphone mode, -OR- 2. Press the corresponding Line button to answer the call in speakerphone mode, -OR- 3. Press the Headset button to answer the call in headset mode. 4. When finished, press Speaker button (in speakerphone) or Headset button (in headset mode) to end the call. NOTE: If you have set the Auto Answer as On in the cordless handset, you can answer the call directly by picking up this handset from the base, without pressing any buttons. NOTE: Adjust the Volume by pressing the VOL (+ or -) button during a call. Switching Between the Speakerphone, Handset, and Headset Mode Base To switch to the speakerphone, press Speaker button. The speakerphone indicator illuminates. To switch to the headset, press the Headset button to enable the headset, and the headset indicator illuminates. Cordless Handset To switch to the speakerphone, press Spk button. If the headset is plug in, press Talk button to switch to headset. If the headset is not plug in, press Talk button to switch to co...