Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
• Slip the mounting holes over the wall plate posts and firmly slide the unit down into place (wall plate not included). SETTING UP THE CALLER ID MENU You should not plug the telephone into the modular jack while setting up the Caller ID menu. 1. Press the MENU button to enter the menu feature configuration mode. # 1. >ENG FRA ESP (CID language default English) # 2. CONTRAST (default level is 3). # 3. LOCAL AREA CODE # 4. TONE/PULSE (Default is tone dialing). 2. Press the MENU button to scroll through the 4 menu screens. 3. Use the or buttons to select the desired setting. NOTE: You have 20 seconds following an entry before the phone returns to the Summary Screen. DISPLAY LANGUAGE This adjustment allows you to display the Caller ID prompts in English, French, or Spanish. 1. Press the MENU button until ENG FRA ESP shows in the display. 2. Use the or buttons to select ENG, FRA or ESP. 3. Press the MENU button again to save. CONTRAST This adjustment allows you to adjust the contrast of the display. 1. Press the MENU button until CONTRAST shows in the display. 2. Use the or buttons to select level 1, 2, 3, 4, or 5. 3. Press the MENU button again to save. LOCAL AREA CODE The telephone uses the programmed area codes to determine the number format to display when a valid Caller ID signal is received. Numbers that match the local area code are displayed as seven digits and are used for dialing back previous numbers. Entering your local area code will also help you immediately know if the call is local or long distance when viewing the CID records in the display. NOTE: If you make a mistake and want to start over again, press the DELETE button to erase all of the digits. 1. Press the MENU button until LOCAL AREA CODE shows in the display. 2. Press the button to select digit. 3. Press the button to enter the second and third digit. 4. Press the MENU button to save. DIALING MODE This adjustment allows you to select tone (touch-tone) or pulse (rotary) dialing. 1. Press the MENU button until TONE/PULSE MODE shows in the display. 2. Press the or buttons to show the current dialing mode. The default is TONE dialing. 3. To change the dialing mode, press the or buttons. The display alternates between the two modes. 4. Press the MENU button again to save. NOTE: The phone will exit Set Up after 20 seconds if no buttons are pressed. REMINDER: The time and date are programmed automatically when the first Caller ID record is successfully received after set up. CALLER ID (CID) FEATURES CID SUMMARY SCREEN The Summary Screen shows the current time, date, and number of new calls to review. It is displayed until any button is pressed. NOTE: The number of new calls is displayed until all new calls have been reviewed. RECEIVING AND STORING CID CALLS This unit receives and displays information transmitted by your local phone company. This information can include the phone number, date, and time; or the name, phone number, date, and time. The unit can store up to 75 calls for later review. When the memory is full, a new call automatically replaces the oldest call in memory. NEW appears in the display for calls received that have not been reviewed. REVIEWING CID RECORDS • Press the or buttons to view the call records. • Press the button to scroll through the call records from the most recent to the oldest. • Press the button to scroll through the call records from the oldest to the newest. • When all of the records have been viewed, START/END appears in the display. DELETING CID RECORDS • To delete the record shown in the display, press the DELETE button once. • To delete all records while reviewing, press and hold the DELETE button for about three seconds. DELETE ALL? appears in the display. Press DELETE again to complete. DIALING BACK When reviewing Caller ID records, you can dialback the numbers on the display by pressing the DIAL button. NOTE: If PICKUP PHONE shows in the display, no other changes to the number can be made. The information sent from the telephone company is known to be a valid number for dialing back (used only in very limited areas). Once you pickup the phone, the number is automatically dialed. IF YOU PROGRAMMED YOUR LOCAL AREA CODE 1. Use the or buttons to display the number you want to dial. 2. Press the DIAL button. • If you see a number with seven digits (i.e. 555-1234), then the call is from within your area code. However, this does not guarantee the call is a local call. • If you see a number with 11 digits (i.e. 1-234-555-1234), then the call is not from within your area code. NOTE: A timer (10 seconds on-hook and 3 seconds off-hook) located in the upper right side of the display will start, letting you know how much time is left until the unit returns to the Summary Screen. 3. If you are at on-hook and PICKUP OR ADJ displays, you can adjust the phone number format by pressing the DIAL button. If the phone is off-hook and ADJUST shows in the display, you can adjust the phone number format by...