Login:
Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Anleitung GE, modell DECT 28821

Hersteller: GE
Dateigröße: 1022.52 kb
Dateiname: fd3a7495-d046-4abb-a669-4e16463159e1.pdf
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


. Press the CALLER ID-VOLUME ( 6or 5) button to scroll to ANSWERER. . Press the mute/menu OK button to enter the menu, press the CALLER ID-VOLUME ( 6or 5) to select HANDSET ACCESS submenu. . Press the mute/menu OK button to access the answering system. ANSWERER REMOTE ACCESS shows on the display. • Press the PLAY/STOP button to play the message. • When you are finished listening to your messages, press the END/cancel button to exit. 6 Screening Calls from the Handset Use the handset to screen calls even when you can’t hear the answering system. When the answering system picks up: 1. Press the mute/menu OK button to go to the main menu. . Press the CALLER ID-VOLUME ( 6or 5) button to scroll to ANSWERER. . Press the mute/menu OK button to enter the menu, press the CALLER ID-VOLUME ( 6or 5) to select HANDSET ACCESS submenu. . Press the mute/menu OK button to access the answering system. 5. Listen as the caller leaves a message. 6. Press the TALK or SPEAKER buttons to speak to the person or press the END/cancel button to stop screening the call. Accessing the Answering System from Another Location You can access your answering system from any touch-tone phone by entering your -digit security code during the playing of outgoing announcement or after you hear the outgoing announcement. 1. Dial the telephone number to which the answering system is connected. . While the outgoing announcement is playing, enter the security code “1 ” -OR- After the announcement has played and you hear a tone, enter security code “1 ” . Follow the voice menu to use the answering system’s remote functions. The remote feature lets you perform the following functions: To Press this button Review message 1 Play back messages Stop message playback Erase message 0 (during message playback) Skip message Turn off/on answerer Review voice menu options 7 7 Memory Full When the answering system memory is full, the system answers after 10 rings, beeps and waits for you to enter the -digit security code. If you don’t enter the security code within 8 seconds, the phone hangs up. You should erase some messages so the answering system can record new messages. NOTE: The unit also answers after the 10th ring if it is turned off. To access the answering system, enter your 3-digit security code. Belt Clip and Optional Headset Connecting the Belt Clip 1. To attach the belt clip, insert the sides of the belt clip into the slots on each side of the handset. . Snap the ends of the belt clip into place. Connecting an Optional Headset to the Handset Each handset can be used with an optional headset hands free operation. 1. Connect the headset to the headset jack on the side of the handset. The handset receiver and microphone are disabled when the headset is connected. . Adjust the headset to rest comfortably on top of your head and over your ear. Move the microphone to approximately two to three inches from your mouth. . Press the TALK button to answer a call or make calls using the headset. . To return to normal operation, unplug the headset from the jack. 8 Changing the Battery CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved Model 5-2814 Nickel-metal Hydride battery (Ni-MH), which is compatible with this unit. 1. Make sure the telephone is OFF (not in TALK mode) before you replace the battery. . Remove the battery compartment door. . Disconnect the battery plug from the jack inside the battery compartment and remove the battery pack from the handset. . Insert the new battery pack and connect the cord to the jack inside the battery compartment. 5. Put the battery compartment door back on. 6. Place handset in the base or handset charge cradle to charge. Allow the handset battery to properly charge (for 16 hours) prior to first use or when you install a new battery pack. If you do not properly charge the phone, battery performance will be compromised. Battery Safety Precautions • Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic materials could be released which can cause injury. • To reduce the risk of fire or personal injury, use only the Nickel-metal Hydride battery listed in the User’s Guide. • Keep batteries out of the reach of children. • Remove batteries if storing over 0 days. NOTE: The RBRC seal on the battery used in your Thomson Inc. product indicates that we are participating in a program to collect and recycle the rechargeable battery (or batteries). For more information go to the RBRC web site at or call 1-800-8-BATTERY or contact a local recycling center. 9 Display Messages The following messages shows the status of the phone, provides Caller ID information, or helps you set up and use your phone. ANSWERER REMOTE ACCESS Indicates the answering system is being accessed remotely. ANSWERING CALL Indicates the answering system is answering the incoming call. BLOCKED NUMBER Indicates the person is calling from a number which is blocked from transmission. C...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien