Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
If you don’t have a modular jack, call your local phone company to find out how to get one installed. Coiled handset cord Cordless handset charge cradle Battery compartment door AC power adaptor cordless handsets Base Handset Belt clip Telephone line cord Pedestal Bracket Handset battery pack Base Wall plate Modular telephone line jack Installation Digital Security System Your cordless phone uses a digital security system to protect against false ringing, unauthorized access, and charges to your phone line. INSTALLATION NOTE: Some cordless telephones operate at frequencies that may cause or receive interference with nearby TVs, microwave ovens, and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV, microwave ovens, or VCR. If such interference continues, move the cordless telephone farther away from these appliances. Certain other communications devices may also use the 5.8 GHz frequency for communication, and, if not properly set, these devices may interfere with each other and/or your new telephone. If you are concerned with interference, please refer to the owner’s manual for these devices on how to properly set channels to avoid interference. Typical devices that may use the 5.8 GHz frequency for communication include wireless audio/video senders, wireless computer networks, multi-handset cordless telephone systems, and some long-range cordless telephone systems. Important Installation Guidelines • Avoid sources of noise and heat, such as motors, fluorescent lighting, microwave ovens, heating appliances and direct sunlight. • Avoid areas of excessive dust, moisture and low temperature. • Avoid other cordless telephones or personal computers. • Never install telephone wiring during a lightning storm. • Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. • Never touch non-insulated telephone wires or terminals, unless the telephone line has been disconnected at the network interface. • Use caution when installing or modifying telephone lines. Handset and Charge Cradle Layout Base Layout visual ringer Display TALK/call back (button) charge cradle with power adaptor CALLER ID-VOLUME 5(button) CALLER ID-VOLUME 6(button) mem (memory button) SPEAKER (button) redial (button) headset jack format/trans (format/ transfer button) chan/delete (channel/delete button) repeat (button) skip (button) play/stop (button) #pause/ringer (button) *exit/tone (button) mute/menu (button) charge indicator flash/call waiting/ answerer (button) erase (button) memo (button) mailbox 1/2/3 play/stop (buttons) delete (button) announce (button) display format (button) caller id 9 (caller id 9 button) caller id : (caller id : button) hs volume (handset volume button) redial (button) memory (button) page (button) ans on/off (answerer on/off button) menu/flash (button) #pause (button) speaker volume +/- (button) mute/do not disturb (button) *exit (button) Microphone speaker/call back (button) hold (button) Installing the Phone Installing the Handset Battery NOTE: You must connect the handset battery before using the cordless handsets. CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved Nickel-Cadmium (Ni-Cd) battery model 5-2729, which is compatible with this unit. 1. Locate battery and battery door which are packaged together inside a plastic bag and are separate from the handset. 2. Locate the battery compartment on the back of the handset. 3. Plug the battery pack cord into the jack inside the compartment. NOTE: It is important to maintain the polarity (black and red wires) to the jack inside the compartment. To ensure proper battery installation, the connector is keyed and can be inserted only one way. 4. Insert the battery pack. 5. Close the battery compartment by pushing the door up until it snaps into place. 6. Place the handsets in the charging cradles. Allow handsets to charge for 16 hours prior to first use. If you don’t properly charge the handsets, battery performance is compromised. black wirered wirebatterypackPRESS DOWNFIRMLY Installing the Phone Choose the best location to install your base and handset charge cradles. Your base and handset charge cradles should be placed on a level surface such as a desk or table top, or you may mount the base on a wall. Connecting the AC (Electrical) Power 1. On the base, plug the power adaptor cord into the power jack on the back of the base and the other into an electrical outlet. CAUTION: To reduce risk of personal injury, fire, or damage use only the 5-2732 power adaptor listed in the user’s guide. This power adaptor is intended to be correctly orientated in a vertical or floor mount position. 2. Plug the handset charge cradle into an electrical outlet. NOTE: The charge indicator on the handset charge cradle turns on to indicate the handset battery is charging Connecting the Telephone Line On the base, plug one end of...