Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: GE Dateigröße: 1007.02 kb Dateiname: 114A3000.pdf Unterrichtssprache:

These instructions are not intended to be comprehensive. Each application is unique, it is the responsibility of the purchasers, designer, installer and end user to ensure that the total control access system is safe for its intended use. Please refer to the manuals and/or qualified technician for further information. NOTE: The default password is “Manager.” ® EL MODEL 2. Click the Unit Configuration ICON Select the DEVICES Tab 1. Click the NEW UNIT ICON Enter Unit Name and select the correct Unit Type 1 Enter Country, State/Prov., City and Phone Number 2 Enter Phone Number to dial into unit 3 Click OK4 3. Select the RELAYS Tab 4. Click the DOORS Tab 1125364Click on the “Device Configuration Wizard” button 1 Choose “RF Receiver” for “J407” 2 Rename “Device 1” to “Back Door Reader” 5 Rename “Device 3” to “Gate Receiver” 6 Choose “Wiegand Device” for “J400” 3 Click OK4 12Set Relay Names, Relay Types and Activation Times: 1 Set Relay Groups: 2 Relay # Relay Name Relay Type Relay Activation Time 1 Front Strike Strike 10 Seconds 2 Security Light Control 60 Seconds 3 Back Strike Strike 10 Seconds 4 Gate Strike 2 Seconds Relay Group Name Front Door Group Back Door Group Gate Group Front Strike X X X X Security Light Back Strike Gate Rename “Door 1” to “Front Door” 1 Select “Front Door Group” from the drop-down menu 2 12Rename “Door 2” to “Back Door” and select “Back Door Reader” for the Device 3 Select “Back Door Group” from the drop-down menu 4 Rename “Door 3” to “Gate” and select “Back Door Reader” for the Device 5 Select “Gate Group” from the drop-down menu 6 Click SAVE7 34567Quick Start Guide For Multi-Family or single-Family (With Directory Codes) Versa XS 234DisabledDisabled DisabledDisabled This Quick Start is intended to highlight a typical Multi-Tenant Complex. These instructions are not intended to be comprehensive. Each application is unique, it is the responsibility of the purchasers, designer, installer and end user to ensure that the total control access system is safe for its intended use. Please refer to the manuals and/or qualified technician for further information. NOTE: The default password is “Manager.” ® EL MODEL 112Enter Last Name1 Enter Display Info2 NOTE: The unit uses Display Info for transactions when the Entry Code or Credential Code is used. 6. Click the ACCESS DETAILS Tab6. Click the NEW TENANT ICON Enter an Entry Code (optional) 1 Click on Select and create a new Credential (optional) 2 NOTE: A credential is a generic term when referring to a transmitter or swipe card. 12Select from the Directory Code drop-down menu to create a new Directory Code (optional) 1 1Choose a Directroy Code (0000-9999) the system will use to dial (optional) 2 Enter Phone No. associated with the Directory Code (optional) 3 Enter Display Name4 3248. Click the AUTO CONFIGURATION ICON OK The Custom Configuration screen will open A pop-up window will inform you that the sucessfully tested. NOTE: If “Test It” button fails, try one of the If the problem If a window appears informing you to close all applications, make sure to close other applications and click Wait for Versa XS to identify modems 1 45Check the “Use This Connect Set for Unit” check box 4 1. Be sure your modem is turned 2. Check the appropriate Connection confirms with the selected settings). 3. Close any other application 4. Close any other 9. Click the TRANSFER DATA ICON Check Configuration and Tenant Info in the Send Data to Unit frame1 5Click OK5 12123Select a Connect Set from the “Connect Set” list 2 Click OK3 Click “Test It” then 5 click Click START2 NOTE: If a mismatch message/Select the Directory Code from the “Directory Code” drop-down menu 6 Click OK7 677. Click the TELEPHONE ENTRY DETAILS tab 114A3000D ©2007 Chamberlain All Rights Reserved 112Enter Last Name1 Enter Display Info2 NOTE: The unit uses Display Info for transactions when the Entry Code or Credential Code is used. 6. Click the ACCESS DETAILS Tab6. Click the NEW TENANT ICON Enter an Entry Code (optional) 1 Click on Select and create a new Credential (optional) 2 NOTE: A credential is a generic term when referring to a transmitter or swipe card. 12Select from the Directory Code drop-down menu to create a new Directory Code (optional) 1 1Choose a Directroy Code (0000-9999) the system will use to dial (optional) 2 Enter Phone No. associated with the Directory Code (optional) 3 Enter Display Name4 3248. Click the AUTO CONFIGURATION ICON OK The Custom Configuration screen will open A pop-up window will inform you that the sucessfully tested. NOTE: If “Test It” button fails, try one of the If the problem If a window appears informing you to close all applications, make sure to close other applications and click Wait for Versa XS to identify modems 1 45Check the “Use This Connect Set for Unit” check box 4 1. Be sure your modem is turned 2. Check the appropriate Connection confirms with the selected settings). 3. Close any other application 4. Close any other 9. Clic...

Herunterladen

Geben Sie zwei Ziffern: