Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
The number dials automatically. Editing a Redial Record Before Dialing 1. Make sure the phone is OFF (not in talk mode). 2. Press the REDIAL button first, then use the CID/VOL ( + or - ) button to select the desired redial number 3. Press the MENU button. 4. Press CID/VOL (- or +) button to scroll to Select. 5. Press the MENU button to enter edit mode. 6. Press CID/VOL ( + or - ) button to move the cursor forward or backward. Use the touch-tone pad to add digits or press the MUTE/ringer on/off button to backspace and delete one digit at a time. 7. After editing, press TALK/END to dial the modified redial number. Storing a Redial Record in Phone Book 1. Make sure the phone is OFF (not in talk mode). 2. Press the REDIAL button first, then use the CID/VOL ( + or - ) button to scroll to the desired redial number. 3. Press the MENU button. 4. Press CID/VOL ( + or - ) button to scroll to Save number. 5. Press the MENU button to enter edit mode. 6. Enter name shows in the display. Input a name. Please refer to section "Handset Name” for name editing method. NOTE: A name must be input otherwise the record cannot be stored. 28 7. Press the MENU button to save. Saved shows in the display. Repeat steps 2 through 7 to save other records. Deleting a Redial Record 1. Make sure the phone is OFF (not in talk mode). 2. Press the REDIAL button first, then use the CID/VOL ( + or - ) button to select the desired redial number 3. Press the MENU button. 4. Use the CID/VOL ( + or - ) button to scroll to Delete?. 5. Press the MENU button to delete the record showing in the display. Confirm? shows in the display. 6. Press the MENU button again to confirm the deletion. Deleted shows in the display. NOTE: Press the FLASH/exit button to return to the standby mode without deleting any redial records. Deleting All Redial Records 1. Make sure the phone is OFF (not in talk mode). 2. Use the CID/VOL ( + or - ) button to display any redial record. 3. Press the MENU button. 4. Use the CID/VOL ( + or - ) button to scroll to Delete all?. 5. Press the MENU button. Confirm? shows in the display. 6. Press the MENU button again to confirm the deletion. All deleted shows in the display. NOTE: Press the FLASH/exit button to return to the standby mode without deleting any redial records. Call Timer After you press the TALK/END button on the handset, the built-in call timer shows on the display and counts the length of time of the call in minutes and seconds. 29 Auto Standby If you place the handset in the cradle while the handset is off the hook (during a call), the call is automatically disconnected. Ringer On/Off 1. Make sure the phone is OFF (not in talk mode). 2. Press the MUTE/ringer on/off button to switch the ringer on or off. NOTE: If you turn the ringer OFF, RINGER OFF shows in the display. Flash If you subscribe to the combined Call Waiting Caller ID service from your local telephone company, you will receive Caller ID information (if available) on Call Waiting calls. During a phone call, you will hear a beep to indicate another call is waiting on the line and Caller ID information for the waiting call shows on the handset display. • To connect to the waiting call, press the FLASH/exit button on the handset, and your original call is put on hold. • To switch between the two calls, press the FLASH/exit button. TIP: Do not press the TALK/END button on the handset to activate a custom calling service, such as call waiting, or call will disconnect. Mute To have a private, off-line conversation, use the MUTE feature. The party on the telephone line cannot hear you, but you can hear them. 1. Press the MUTE/ringer on/off button. The handset display shows MUTE. 2. Press the MUTE/ringer on/off button to cancel and return to your phone conversation. 30 Page The page feature helps you locate a misplaced handset. 1. Press the PAGE button on the base. The charge/in use indicator on the base flashes; the handset beeps and Page from base shows in the handset display. 2. To cancel the page, press the PAGE button on the base, or press any key on the handset. Otherwise the paging will last for 2 minutes. Receiver Volume Control When the handset is ON (in talk mode) you may adjust the receiver volume by pressing the CID/VOL ( + or - ) button. There are five volume levels to choose from. VOL 1 is minimum and VOL 5 is maximum. Intercom Operation The intercom feature allows you to have a conversation with another registered handset without tying up the telephone line, allowing you to still receive incoming calls. NOTE: The function is applicable only with additional handsets. Handset to Handset Intercom Call 1. Make sure the originating phone is OFF (not in talk mode). 2. Press the MENU button and use the CID/VOL ( + or - ) button to scroll to Intercom. 3. Press the MENU button to enter the menu. INT- Number? shows on the display. 4. Use the touch-tone pad to input the number of the handset you w...
Dieses Handbuch ist für folgende Modelle:Telefonanlagen - 27951 (2.98 mb)