Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Improper adjustment of other controls may result in damage and will often require extensive work by a qualify technician to restore the product to normal operation. E. If the product has been dropped or the cabinet has been damaged. F. If the product exhibits a distinct change in performance. 13. Avoid using a telephone (other than a curdles type) during an electrical storm. There may be a remote risk of electric shock from lightning. 14 Do not use the telephone to report a gas leak in the vicinity of the leak. €R^SfcE¥ CR92 Country Kitchen Phone WARRANTY Crosley Radio Products are warranted against defects in material and workmanship for a period of 90 days beginning from the date of sale to the original purchaser. Should the unit fail under normal usage during the 90 day warranty period, a request for RETURN AUTHORIZATION (R.A.) must be made by the original customer before returning the unit. Call Crosley Radio customer service for Return Authorization at (502) 583-4246 from 9 AM to 5 PM (EST) Monday to Friday. Upon receiving the RETURN AUTHORIZATION number from the Customer Service Department, properly pack your unit in its original packaging. Include any adapters, parts, & accessories which were originally provided with the product, along with a check or money order for $19.95 made out to Crosley Radio to cover the handling and return postage. Display the R.A. # on the outside of the carton and ship PREPAID via standard UPS or its equivalent. ATTN: RETURNS DEPT 2001 PRODUCTION DRIVE BAY 2 & 3 LOUISVILLE. KY 40299 CROSLEY RADIO assumes no responsibly for units senl without prior Return Authorization. The purchaser's bill of sale is the only proof of warranty entitlement and must accompany the unit. The warranty does not cover damage due to acts of nature, accident, misuse, abuse, negligence, commercial use or modification of. or to any part of the product, Tins warranty does not cover damage due to improper operation or maintenance, connection to improper voltage supply, or attempted repair by anyone other than a facility authorized by Crosley Radio to service the product. This warranty does not cover products sold AS IS or consumables (such as fuses or batteries), This warranty rs valid only in the United States This warranty gives the purchaser specified legal rights in addition to any rights which may vary from state to state In accordance with the ‘Moss-Magnuson Warranty Act' of July 10.1975. this is termed a limited warranty1 which in no way compromises Crosley Radio, high standards of Quality and Workmanship. SAVE THESE INSTRUCTIONS SET UP DIAL MODE Locate the DIAL MODE switch on the rear of the telephone body. Slide the switch to Tone unless you have Dial-Pulse (Rotary) telephone service in your area in which case, slide the switch to the PULSE position. RINGER CDNTRDL The RINGER CONTROL switch is on the rear of the telephone body. It allows you to turn the ringer OFF or set it to ring at either LOW or HIGH volume. You can still make or receive colls with the ringer in the OFF position, however, you will not hear the incoming ring. RECEIVER VOLUME The RECEIVER VOLUME CONTROL switch, located on the rear of the telephone body, allows you to adjust the volume of the receiver earphone from LO and HI. HANDSET CDRD To assemble, insert one end of handset cord into the HANDSET CORD JACK and the other end to the HANDSET CORD JACK located on the left side of the telephone body. INSTALLATION MODULAR WALL JACK To install the telephone directly on a modular wall jack : 1. Connect the 1 5 inch line cord to the LINE CORD jack on the rear of the telephone body. 2. Tuck the line cord into the channel on the cabinet rear. 3. Peel and stick the rubber pads on rear of telephone cabinet in designated areas. 4. Hold the telephone body up next to the modular jack and plug the line cord into this jack. 5. Tuck the excess line cord into the recess provided on the rear of the telephone body. 6. Line up the mounting holes of the telephone body with the mounting studs (screw heads) on the modular jack or wall. 7. Push the telephone body against the wall jack and down until it is held securely in place by the mounting studs. WALL If you are not mounting directly onto a modular wall jack, proceed as follows : 1. Install the 7 foot line cord into the LINE CORD jack on the rear of the telephone body. If the desired location is further than 7 foot from a wall jack, you will have to obtain a longer line cord available at most hardware stores. 2. Place the provided TEMPLATE against the wall in the position desired. 3. Mark the wall by poking either a pen or pencil through the indicated spots on the template. 4. If there is no stud at this location, it will be necessary to install the provided wall anchors. Drill a small pilot hole at the marked locations. Tap the anchors into the holes. Then insert screws, but DO NOT TIGHTEN. Leave the screw heads protruding about 1/4 inch. 5. If there is ...