Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Philips Dateigröße: 1.73 mb Dateiname: Unterrichtssprache:

1. Press . 2. Select ADVANCED SET and press OK. 3. Select AREA CODE and press OK. 4. Enter the area code. 5. Press OK to confirm. Set display contrast 1. In idle mode, press . 2. Select PERSONAL SET and press OK. 3. Select CONTRAST and press OK. The current setting is displayed. 4. Press UP / DOWN to adjust the contrast and press OK to confirm. 33 US Other features Turning the backlit on/off The LCD and keypad will be lit when the phone is being used. 1. In idle mode, press . 2. Select PERSONAL SET and press OK. 3. Select BACKLIT and press OK. The current backlit is displayed. 4. Select ON or OFF and press OK to confirm. Restore handset default settings You can reset the display, sounds, and other settings of your phone. Refer to the chapter “Default settings”, page 39. 1. In idle mode, press 2. Select ADVANCED SET and press OK. 3. Select RESET and press OK. 4. Press OK to confirm. Set Baby call on/off Baby call allows you to dial out a programmed number via the telephone line by pressing any key on the handset (except the OFF key). 1. In idle mode, press 2. Select ADVANCED SET and press OK. 3. Select BABY CALL and press OK. The current setting is displayed. 4. Select ON and press OK. 5. Enter or edit the number and press OK to confirm. BABY CALL is displayed when you return to standby mode. To turn off baby call, 1. Press 2. Select OFF and press OK. . . . 34 Other features Other features US Registering Register a new handset to base station Each base can register up to 4 handsets. 1. In idle mode, press . 2. Select ADVANCED SET and press OK. 3. Select REGISTRATION and press OK. 4. Long press on the base for 4 seconds. Note : If the base is full, the base would not go into registration mode. See the section “Unregister a handset”, page 35 to unregister a currently registered handset. Note : The range of this handset is 250 m outdoor and 50 m indoor. An out of range warning will be emitted and the range icon will be flashing on the display if you move too far away from the base unit during a call. You will need to move closer to the base unit or your call will be disconnected. Unregister a handset A handset can un-register another handset registered to the same base. It can also un-register itself. 1. In idle mode, press . 2. Select ADVANCED SET and press OK. 3. Select DELETE HS and press OK. 4. Select the handset you would like to un-register and press OK. 5. Press OK to confirm. Select the base station If your handset is registered to more than 1 base, you can select which base the handset will use. 1. In idle mode, press . 2. Select ADVANCED SET and press OK. 3. Select BASE SELECT and press OK. 4. Select the base to use and press OK. Note : Bases your handset is registered to which is not Philips VOIP 321 base will be labelled as GAP BASE; your Philips VOIP 321 base will be labelled as BASE in Base Select. 35 US Other features User status User status display Skype status icons are used on the handset to represent different online status as well as each contact's online status on the Skype contact list. Please refer to the following table for the description of each status. Online / SKYPE ME Offline Away Not Available Not Disturb Invisible SkypeOut entry User status settings You can change you current Skype status on the handset. To change your online status : 1. In idle mode, press . 2. Select SKYPE and press OK. 3. Select USER STATUS and press OK. 4. Select the status to change into and press OK to save the status. Check your Skype credits You can also check your SkypeOut account credits before you make a SkypeOut call. To check your SkypeOut credits, 1. In idle mode, press . 2. Press UP / DOWN to select SKYPE and press OK. 3. Press UP / DOWN to select CREDITS and press OK when finish. 36 Using the intercom Using the intercom US Note : You need at least 2 handsets to carry out the functions mentioned in this chapter. Make an internal call You can call someone in the house by using the intercom function on your phone. To make an intercom call : 1. Press . 2. Select the handset you want to call and press OK OR enter the number of the handset that you want to call. Note : You will hear a busy tone if the other handset is not available. Make an internal call during an external call While you are on an outside call, you can put the outside call on hold and make a call (inquiry call) to someone in the house. To make an inquiry call, during an outside call : 1. Press . 2. Select the handset you want to call and press OK OR enter the number of the handset that you want to call. 3. Wait for the other handset to answer your call. Note : If the other handset does not answer, press again to cancel the attempt and return to the external call. Transfer an external call to another handset During an external call, 1. Press . 2. Select the handset you want to call and press OK OR enter the number of the handset that you want to call. 3. When the other handset has answered your call, press or place the handset on cradle. ...

Herunterladen

Geben Sie zwei Ziffern: