Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
3. Connect the telephone line cord to a modular telephone jack. 4. Slide the RINGER switch (on the side of the handset) to ON. 5. Set PULSE/TONE switch (on the side of the handset) to TONE for touch-tone service, or set it to PULSE for rotary service.If you don’t know which type of service you have, check with the phone company. Press the FLASH button instead of the hook switch to activate custom calling services such as call waiting or call transfer. Custom calling services are provided by the phone company. TEMPORARY TONE If you have pulse service, you can temporarily change from pulse to tone service in order to access services that require tone dialing (such as getting information from a local bank). After dialing the telephone number, press and release the tone button, marked with an asterisk (*). When you hang up, your phone returns to pulse service. TROUBLESHOOTING TIPS 2ABC3DEF15JKL6MNO48TUV9WXYZ70OPER#* GHIPQRSTONEFLASH REDIAL REDIAL button FLASH button ProblemESolutionE No dial tone. • Check hook switch to make sure it pops up. Won't dial out • Make sure PULSE/TONE is set to correct position. Phone doesn’t ring • Make sure RINGER switch is set to ON. • You might have too many phones on one line. Feedback when • This is normal. Power fluctuates with phone outpulsing. dialing in PULSE mode. Can’t be heard by • Make sure phone cord is securely plugged in. other party • Make sure other phones aren't off the hook at the same time you're using the phone. It is normal for the volume to drop when additional phones are used at the same time. FOLD WALL MOUNT INSTALLATION 1a. If the modular phone jack is in the base plate on the wall where you're going to mount your phone, just plug the telephone line cord into the jack; mount the phone on the posts; and set the RINGER switch and PULSE/TONE switch (described in detail below). 1b. If the modular phone jack is near the floor and you want to mount the phone on the wall, remove the telephone line cord from the pocket that is on the bottom of the phone. Unscrew the circular cord cover on the bottom of the phone with a Philips screwdriver. Wrap the phone cord around the circular guide and screw the circular cord cover in place. 2. Plug telephone line cord into the modular jack. 3. Slip mounting holes on the bottom of the telephone over the wall plate posts and slide the base down until the phone is firmly in place. (Wall plate is not included.) 2 3 1a Screw- driver 1b Telephone line cord Mounting holes Coiled handset cord Screw 4. Slide the RINGER switch (on the side of handset) to ON. 5. Set PULSE/TONE switch (on the side of the handset) to TONE for touch-tone service, or set it to PULSE for rotary service. If you don’t know which type of service you have, check with the phone company. FOLD ABCDEFJKLMNOTUVWXYOPERGHIPRSTONE000000002315648970#* ONOFFRINGERTONEPULSE4 5 LIMITED WARRANTY What your warranty covers: • Any defect in materials or workmanship. For how long after your purchase: • One year. (The w...
Dieses Handbuch ist für folgende Modelle:Telefonanlagen - 2-9121 (208.56 kb)
Telefonanlagen - 2-9122 (208.56 kb)
Telefonanlagen - 2-9123 (208.56 kb)
Telefonanlagen - 2-9124 (208.56 kb)