Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Brother Dateigröße: 1.12 mb Dateiname: UM_PT_1750_ENES_1390.pdf Unterrichtssprache:

" " " MEMORY FUNCTIONS MEMORY FUNCTIONS You can use the memory to store your most frequently used text files. The text remains in the memory, even after all characters are removed from the display using the Clear function (holding down f and pressing c ). When each file is stored, it is given a number to make recalling it easier. Up to 9 text files or about 300 characters can be stored in the memory. Each stored text file can have a maximum of 60 characters. Since a copy of the stored text file is recalled when the Recall function is used, the text can be edited or printed without changing the originally stored file. When a file is no longer needed or more space is necessary, the Memory delete function can be used to delete it. . When inserting new batteries, be sure to insert the new ones within five minutes of removing the old ones, otherwise any text files stored in the memory will be lost (unless the machine is plugged into an electrical outlet with the AC adapter). STORING TEXT To store a text file: 1 Hold down f and press 8. The message “STORE:1–9?” appears on the display. . If 300 characters have already been stored, the error message “MEMORY FULL!” appears in the display. If this occurs, an existing text file must be deleted before the new one can be stored. 2 Press the key ( 1 to 9 ) of the file number where you wish to store the text. The text is stored under the selected file number and the text previously shown in the display reappears. . If a file is already stored under the selected file number, the message “OVERWRITE?” appears in the display and you must decide whether or not to overwrite it (delete it from the memory and store the new one). To quit the Store function without storing the text, hold down f and press 8 (or press justc ). To overwrite the stored file with the new one: . Press h to delete the previously stored file and store the new one under the selected number. . To go back and choose another file number without overwriting the text file, pressc, and then press the key of a different file number. RECALLING TEXT To recall a text file: 1 Hold down f and press 9. The message “RECALL:1–9?” appears on the display. 2 Press the key ( 1 to 9 ) of the file number containing the text that you wish to recall. The text stored under the selected file number is shown. . To quit the Recallfunction without recalling text, hold downfand press9 (or press justc ). 3 Press h. Any text previously entered in the display is erased and the text stored under the selected file number is recalled into the display. DELETING A FILE To delete a text file: 1 Hold down f and press 0. The message “M.DEL:1-9?” appears on the display. 2 Press the key ( 1 to 9 ) of the file number containing the text that you wish to delete. The text stored under the selected file number is shown. . To cancel the Memory deletefunction without deleting the text file, hold down f and press9 (or press justc ). 3 Press h to delete the text file that was selected. EXAMPLE To store text under file number 4: 1Hold down f and press 8. STORE:1-9? 2Press 4. 4? 3Press h. John Smith To recall the text from file number 4: 1Hold down f and press 9. 2Press 4. 3Press h. To delete the text stored under file number 4: 1Hold down f and press 0. 2Press 4. 3Press h. RECALL:1-9? 4? John Smith John Smith M.DEL:1-9? 4? John Smith TROUBLESHOOTING TROUBLESHOOTING Problem Remedy 1. The display stays blank after you have • Check that the AC adapter is connected turned on the machine. correctly. • If you are using batteries, check that they are correctly inserted. • If the batteries are low, replace them with new ones. 2. The machine does not print or the • Check that the tape cassette has been printed characters are blurred. inserted properly. • If the tape cassette is empty, replace it with a new one. • Make sure that the tape compartment cover has been closed. 3. The text files that you stored in the memory are no longer there. If the batteries are low, replace them with new ones. 4. The printed characters are not formed properly. If you are using batteries, they may be low. Try using the AC adapter or replace the batteries with new ones. 5. A blank horizontal line appears through the printed label. Clean the print head as explained on page 8. 6. Striped tape appears. You have reached the end of the tape. Replace the tape cassette with a new one. 7. The machine has “locked up” (i.e., nothing happens when a key is pressed, even though the machine is on.) Turn off the machine, and then while holding down f and R, press b to turn the machine back on. Finally, release f and R. + The text and formats in the display and all text files stored in the memory are erased. ERROR MESSAGE LIST ERROR MESSAGE LIST Error Message Cause Remedy 2 LINE LIMIT! This message appears if two lines already exist when you press h. Limit the number of lines to two. BATTERY WEAK! This message appears when the installed batteries become weak. Replace the batteries or use the AC adapter...

Herunterladen

Geben Sie zwei Ziffern: