Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: NuTone Dateigröße: 492.95 kb Dateiname: Unterrichtssprache:

You can set each station to one of four configurations: • Intercom Only • Radio/INT (Music source and Intercom) • Off • Monitor Note: When the system has more than 9 Room Stations some intercom selector switches will control two room stations. • The station hears the door chime and communicates with and listens to a Door Station. Off When a station is set to OFF: • You can communicate from an Indoor Remote Station but you cannot communicate from an Outdoor Remote Station. • Other Remote Stations cannot listen to the room. • The room cannot receive music or intercom-related audio. • The room cannot be monitored. • The station does not hear the door chime and cannot talk and listen to the Door Station. Monitor When a station is set to Monitor: • Any station set to Radio/INT can continually hear all sound and activity in the room. • You can communicate with other room stations. • The room cannot hear the door chime. • You can talk to the Door Station, but will not be able to listen to it. • The room cannot receive music. Talk Talk allows users to talk to all stations with selector switches set to Intercom or Radio/INT. To initiate a Talk/Listen session, press TALK and begin talking. You can hear remote users if you press the LISTEN button or if they press their TALK button. Listen Press LISTEN to listen to all stations set to Intercom or Radio/ INT. Door Talk/Listen • Press TALK and LISTEN simultaneously to enter Door Talk mode. This allows you to talk to the Door Stations. All other stations set to Intercom or Radio/INT can hear the conversation. • Release the TALK and LISTEN buttons to listen to the Door Station. The Listen mode is active for a total of 25 seconds after you release the TALK and LISTEN buttons. You may talk again at any time by pressing TALK and LISTEN. Each time the buttons are released, you can listen for another 25 seconds. • Door Talk mode is suspended at the end of the 25 second listening period or if you press either the TALK button or the LISTEN button individually. Monitor All stations set to Radio/INT on the Master Station can continually hear the sound and activity from a station set to Monitor. Security/Home Automation (Optional) This optional function can control another system that is properly connected to the NM100. For example, it may control a door release mechanism, turn on the lights, set off an alarm, etc. This function is available from the Master Station and Remote Stations (NRS103WH and NRS104WH). It is not available from an outdoor remote station. To initiate this feature from a room station: 1. Simultaneously press VOLUME UP and VOLUME DOWN and hold for at least 4 seconds. After 4 seconds, this feature is active for as long as the buttons are pressed. 2. Release the buttons to deactivate the feature. Master Station Operation Radio Operation 1. Press POWER to turn on music. 2. Select either FM or AM as the music source. See Master Station Settings/Music Settings/Music Source for instructions. 3. Use TUNE UP or TUNE DOWN to select a station, or press PRESET to select a preset station. Remote Station Operation 4-Wire (M&S Systems Retrofit) Remote Station Functions • Door Talk/Listen Press TALK and LISTEN simultaneously to talk to the Door Stations. Release both buttons to listen. • Listen Listen to all stations set to Intercom or Radio/INT. intercom operation • Talk Talk to all remote stations set to Intercom or Radio/INT. • Speaker Volume Use Speaker Volume knob to adjust the remote speaker volume. • Music Volume Turn Music Source On and Off You can turn the Music Source on and off from the NRS104WH or the NPS104WH Remote Station. To turn the Music Source on, press and hold the MUSIC VOLUME UP button. To turn the Music Source off, press and hold the MUSIC VOLUME DOWN button until the volume level goes to zero. Adjust System Music Volume Adjust the system music volume from any Remote Station by pressing VOLUME UP or VOLUME DOWN. • Select Music Source The system music source can be selected from any Remote Station. The music sources that are available vary depending on the Scan setting on the Master Station (See Master Station Settings/Music Settings/Scan Mode for details). Note: You cannot select specific tracks on the CD from a Remote Station. To scan for a music source: Simultaneously press and release VOLUME UP and VOLUME DOWN to switch music sources. Note: If you press and hold these buttons for 4 seconds or more, you initiate the Security/Home Automation function (See Intercom Operation/Security/Home Automation for details). This function is not available on the Outdoor Remote Station. Remote Station Operation 3-Wire (NuTone Retrofits) Remote Station Functions • Door Press Door to talk to the Door Station. Release button to listen to the Door Station. • Remote Press Remote to talk to Remote Stations. Remote Stations press Talk to reply. • Speaker Volume Use Speaker Volume knob to adjust the remote speaker volume. • Music Volume Turn Music Source On and Off You can tu...

Herunterladen

Geben Sie zwei Ziffern: