Stimmen - 4, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
After you subscribe, the Voice Mail system can answer calls automatically when your line is busy or if the calls are not answered. Callers can leave messages by following the pre-recorded instructions. . . ... Voice Mail icon When you have Voice Mail messages, the Voice Mail icon will flash at the right upper corner and the “VOICE MAIL" indication will alternate with the default mode. pm 121QQ 3/15 os I'OICE HAIL o— • The Voice Mail icon will flash until all messages have been retrieved from your Mail . box by dialing the local access number provided by your phone company. • While in the default mode, if the “VOICE MAIL" message or icon continue flashing after \ you have listened to all your Voice Mail message^), press CLEAR to erase the flashing “VOICE MAIL" message and icon. [ • The Voice Mail tone can be heard and messages can be retrieved from any extension phone connected to the same telephone line, if you use other extension phone you have to dial your access number as well. Note: This unit is compatible with FSK and stutter tone for Voice Mail detection. 6 USEFUL INFORMATION Section 6 Low Battery indicator pmIcTOD 3/15 oc HEU.'OO OLJiaO 6-A Battery Replacement Replace the batteries when the Low Battery icon (lashes on the upper right corner of the display or the display contrast looks dim after the contrast level has been adjusted to maximum. We recommend you to use high quality alkaline batteries. Batteries last for about four months, depending on use. Note: Do not take more than 30 seconds to replace the batteries: otherwise you will lose all your data and settings. 6-B Setting the Display Contrast Level When the associated telephone is on hook: 1 Press CALL BACK / MENU. 2 Press DOWN (33 three times to scroll until “CONTRAST option is found. 3 Press CLEAR / SET to select the “CONTRAST option. 4 Press UP / SELECT (ZD to choose the display contrast from level 1 to 5. 5 When finished, press DOWN / SAVE Cm) to save the setting. The display will show “SAVED!”. pm 12: do i 3/15 1 CONTRAST mie: do 3/15 SRI'ED! To exit from menu press CALL BACK I MENU again. Note: When you replace the batteries, the contrast level will RESET to 1 (default level). 6-C Before Requesting Help [Problem The unit does not work. The Caller’s name and phone numbers do not appear on the display. When you receive a call the display shows “OUT OF AREA”, "PRIVATE CALLER” or “LONG DISTANCE”. You cannot dial numbers from the Caller ID List. The Caller ID display is not clear. Previously programmed information Is erased. If you cannot solve your problem (Hfflêdy i • Check the settings section, i • Remove the batteries and reinstall them to I reset the unit. ! • You must be subscribed to the Caller ID j service. | * When the unit is connected to a PBX system, j you cannot receive Caller ID information. j • In some calling areas, the name display I service may not be available. For further information, please contact your telephone company. When the unit is connected to a PBX system, this option does not work, even if you have edited the number correctly. You must check the batteries’ condition. Install new batteries. Check the contrast level. Do not take more than 30 seconds to replace the batteries because programmed information may be erased. Reprogram if necessary. Call our customer call center at 1 -800-211 -PANA (7262) or 1 -800-833 9626 for the location of an authorized service center. Panasonic's e-mail address for customer inquiries: consumerproducts@panasonic.com for customers in the USA or Puerto Rico ONLY 7 IMPORTANT SAFETY INSTRUCTIONS Section 7 7*A Safety Instructions When using this unit, basic salety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury. 1.- Read and understand all instructions. 2.- Follow all warnings and instructions marked on this unit. 3.- Unplug this unit from the telephone line before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4.- Do not use this unit near water, for example, near a bathtub, washbowl, kitchen sink, or the like. • 5.- Place this unit securely on stable surface. Serious damage to the unit may results it it tails. 6.- Do not cover slots and openings on the unit. They are provided for ventilation and protection against overheating. Never place the unit near radiators, or in a place where proper ventilation is not provided. 7.- Do not place objects on the line cords. Install the unit where no one can step or trip on the cords. 8.- Never push any objects throuah slots in this unit. This may results in tne risk of fire or electric shock. Never spill any liquid on the unit. 9.- To reduce the risk of electric shock, do not disassemble this unit. Take the unit to an authorized service center when service is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect re-assembly can cause electr...
Dieses Handbuch ist für folgende Modelle:Telefonanlagen - KXTBC10B (670.65 kb)