Stimmen - 5, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
We want you to know all about your new telephone, how to install it, the features it provides, and the services you can expect from its use. We have included this information in your Owner’s Instruction Manual. PLEASE READ BEFORE INSTALLING AND USING YOUR NEW TELEPHONE. TELEPHONE SERVICE PROBLEMS If you have any problems with your telephone service, determine if the problem is with your telephone or the telephone company lines. BEFORE CALLING THE TELEPHONE COMPANY, be aware that they may charge you for a service call if the problem is caused by your telephone. NO DIAL TONE • Unplug your telephone from the wall jack. Plug a substitute telephone that is known to work properly into the same wall jack. • If the problem persists when using the substitute telephone, notify the telephone company. • If the substitute telephone works properly, you must have your telephone repaired before reconnecting it to the wall jack. DIAL TONE BUT NO RINGING • Check that the RINGER VOLUME CONTROL is not set to OFF. • Set the RINGER VOLUME CONTROL to HIGH and have someone on another line call you. Before answering the call, set the RINGER VOLUME CONTROL to the desired volume. DIAL TONE BUT NO DIALING If your telephone has a TONE/PULSE switch: • Set the TONE/PULSE switch. You cannot dial out in TONE position if you have Rotary Dial Service. • For Rotary Dial Service, set the switch to PULSE position. • For Tone Dial Service, set the switch to TONE position. • Try both positions if you are not sure. IMPORTANT SAFETY INSTRUCTIONS Always follow basic safety precautions when using your telephone equipment toreduce the risk of fire, electrical shock, and injury. 1. Read and understand all instructions in the Owner’s Instruction Manual. 2. Read all warnings and follow all instructions marked on the product. 3. Unplug this product from the walloutlet before cleaning. Use a dampcloth for cleaning. Do not use liquidor aerosol cleaners. 4. Do not use the telephone near water. For example, do not use near a bathtub, wash bowl, kitchen sink, laundry tub, swimming pool, or in a wet basement. 5. Do not place this product on anunstable cart or stand. The productmay fall causing serious damage to theproduct. 6. Do not place any objects on the telephone line cord. Do not locate the telephone where the line cord will be walked on. 7. Do not block or cover ventilation slots and openings in the bottom of the telephone. The openings should neverbe blocked by placing the telephone ona bed, sofa, rug, or other similarsurfaces. This telephone should neverbe placed near or over a radiator or heatregister. This telephone should neverbe placed in a built-in installation unlessproper ventilation is provided. 8. Never spill liquid on the telephone orpush objects of any kind through ventilation slots. Liquid or objects may touch dangerous voltage points or shortout parts that could result in a risk of fire or electrical shock. 9. Do not disassemble this product. Opening or removing covers mayexpose you to dangerous voltages orother risks. Incorrect reassembly cancause electrical shock when the productis subsequently used. 10. Avoid using a telephone during alocal thunderstorm. There may be aremote risk of electrical shock from lightning. 11. Do not use a telephone in the vicinityof a gas leak to report the leak, orotherwise. 12. Unplug the telephone from the walloutlet and refer servicing to qualifiedservice personnel under the followingconditions: • When the line cord is frayed or plugsdamaged. • If liquid has been spilled into thetelephone. • If the telephone has been exposed torain or water. • If the telephone does not operateproperly by following the operatinginstructions. • If the telephone has been dropped orthe housing damaged. • If the telephone exhibits distinctchange in performance. SAVE THESE INSTRUCTIONS 15-101-613 INSTALLINGYOUR TELEPHONE DESK INSTALLATION telephone is ready to use. To disconnect your telephone, press the spring clip on the line cord plug and pull out. To install a desk telephone, use the long modular line cord supplied with your telephone. Plug one end of the line cord into the connector on the back of your telephone and the opposite end into the modular wall jack. Your WALL INSTALLATION To install a modular wall telephone, refer to the diagram tothe right. • Fit the plug (1) on the back of thetelephone into the jack (2). • Align slotted holes (3) on the back of the telephone over the mounting studs (4). • Gently pull down on the telephone until it locks in place. NUMBER CARD PUSH-BUTTON DIAL TELEPHONES Write or type correct telephone number onnumber card and fit into number card slot in the telephone faceplate. Insert one endof the clear plastic retainer in one end ofthe slot and, holding the retainer as shownat right, bend the opposite end down intothe slot and let it snap into place. Toremove the retainer, insert a straightened paper clip into the smallslot in the retainer and pry outward. ROTARY DIAL TELEPHONES Rotate the fin...
Dieses Handbuch ist für folgende Modelle:Telefonanlagen - 2554 (46.95 kb)