Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
• Caller ID Record* - stores up to 90 Caller ID records each of which up to 14 digits number and 15 characters name. • Area Code Setting - sets your local area code. • New Call Light Indicator (Green LED)* - lights up steadily when there is a new call. • Message Waiting Light Indicator (Red LED)** - lights up steadily when there are voice mail messages in your mailbox. • Review Scrolling - easily scroll through the Caller ID records. • Dial Button - dials the number shown on the LCD display. • Delete Button - allows you to delete one or all Caller ID record. • DIAL VM Button** - dials to your voice mail access number. • Languages - English, Spanish or French display prompts. • Real Time Clock - shows the current time on the LCD display. • LCD Display Contrast Control - allows you to adjust the display contrast. • Wall Mountable - allows you to mount your caller ID unit on the wall. • Backlit LCD Display Note: * You must subscribe to the Caller ID service from your local telephone company. ** You must subscribe to the Voice Mail service from your local telephone company to retrieve voice mail messages. IMPORTANT : a) The AC Power Adapter (included) must be connected to operate your Caller ID unit. b) 4 X AAA batteries are recommended to be installed to retain your Caller ID memory. 3 Control Locations EN Control Locations EN Control Locations 1. Message Waiting Light Indicator (red LED) - lights up steadily when you have new voice mail messages. 2. New Call Light Indicator (green LED) - lights up steadily when new calls are received. 3. Visual Display Panel - shows the caller’s name and / or number, incoming call time & date,Call Counter,New Call icon (NEW) and Voice Mail icon ( ). 4. [DIAL VM] Button - dials to your voice mail access number. 5. [DELETE] Button - deletes Caller ID records. 6. [REVIEW ] / [REVIEW ] Buttons - views the Caller ID records. 7. [DIAL] Button - dials the number shown on the display. You also use this button to set language, area code, time and date and LCD display contrast. 8. [FLASH] Button - activates 3-Way conference or Call Waiting calls. 9. TELEPHONE Jack - connect line cord from your telephone into the jack labeled PHONE at the back of your caller ID unit. 10. TEL LINE Cord Jack - insert one end of the telephone line cord into the jack labeled TEL.LINE and the other end into your wall jack. 11. DC Jack -the AC adapter must be connected for your Caller ID unit to operate. Plug the adapter into the DC 9V jack at the back. Installation THE AC POWER ADAPTOR THAT COMES WITH YOUR CALLER ID UNIT IS REQUIRED FOR THE OPERATION OF THE UNIT. HOWEVER , IT IS RECOMMENDED TO INSTALL 4 X AAA SIZE BATTERIES TO PREVENT LOSS OF MEMORY WHEN THERE IS A POWER FAILURE. Please check to be sure all supplied accessories come with your Caller ID unit.If there is anything missing or visible damage,please contact the original place of purchase. Do not attempt to operate your caller ID unit if it is damaged. Installation EN Installation EN a) Caller ID unit 1 pc. b) Stand studs 2 pcs. c) AC power adapter 1 pc. d) Long phone line cord 1 pc e) Short phone line cord 1 pc INSTALLING BATTERIES Please install 4 x AAA batteries (alkaline batteries are recommended) to retain the Caller ID records and keep real time clock running in case there is a power failure. IMPORTANT : a) Use only fresh batteries of the required size and recommended type. b) Do not mix old and new batteries, different types of batteries (standard, alkaline or rechargeable) or rechargeable batteries of different capacities. c) When replacing the batteries,if you do not install the new batteries within 30 seconds after removing the old ones, you may lose all information stored in your unit. d) If you do not plan to use your unit with batteries for a month or longer, remove the batteries. Batteries can leak chemicals that can destroy electronic parts. e) Dispose of old batteries promptly and properly. Do not burn or bury them. When the Low Battery icon ( ) appears, replace the batteries. 1. Disconnect the telephone line. 2. Open the battery cover by inserting a sharp object (such as a clip or a pencil) into the two slots at the top of the battery compartment cover on the bottom of your Caller ID unit. 3. Place the new batteries in the compartment following the polarity symbols (+ and -) marked inside. 4. Replace the battery cover. 5. Reconnect the telephone line. IMPORTANT : When replacing the batteries, if you do not install the new batteries within 30 seconds after removing the old ones, you may lose all Caller ID records stored in your Caller ID unit. 5 InstallationEN InstallationEN The AC adapter must be a Class 2 Power Source, 9V DC, 200mA PHONETEL. LINE Connecting to a telephone and/or answering machine After installing 4 x AAA batteries, connect one end of the line cord provided into your Caller ID unit's jack labeled TEL.LINE and connect the other end of the line cord into the telephone wall jack.Connect the existing line cord on your ...