Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Please read this manual carefully before using the camera and follow the instructions to avoid any damage that could be caused by improper operation. Caution The software CD-ROM packaged with the camera is designed to be used with a personal computer only. Do not attempt to play this CD-ROM on a stereo or CD player as this may cause damage to both the disc and the CD player. This camera is a precision electronic device. Do not attempt to service this camera yourself. Opening or removing the cover may expose you to dangerous voltages or other risks. Further, avoid exposing this camera to direct sunlight as doing so could cause a fire. Before Using Your Camera Use your camera to shoot several trial images before taking pictures of important subjects to ensure proper operation. Any loss caused by the malfunction of this 2 product (such as costs of photography or loss of benefit generated by the photography) is not the responsibility of Argus Camera Company and no compensation will be given for it. Copyright Information Unless agreed by the rightful owner, pictures taken with this digital camera cannot be used in violation of copyright law. Moreover, when there is a “No Photography” restriction in place, you cannot record any performance, improvisation, or exhibit even for personal use. Any transfer of pictures or memory cards with data must be conducted under the constraints of copyright law. Caution When Using the Camera This product consists of intricate electrical parts. To ensure that the camera photographs normally, do not drop or hit the camera when taking pictures. Avoid using or placing the camera in the following locations: 1. Damp and dusty places. 2. Sealed vehicles or other places exposed to direct sunlight or subject to extreme temperatures. 3. Turbulent environments. Do not open the battery cover when the power is on as this may cause a loss of images. If the camera has gotten wet, immediately turn the power OFF and remove the batteries. Do not attempt to dry it with an external heat source. How to Maintain Your Camera 1. If the lens, LCD display, or viewfinder is dirty, please use the accompanying cleaning cloth to wipe the surface clean. Avoid touching these areas with your fingers. 2. When not in use, keep the camera in its carrying case, otherwise you risk scratching the lens, LCD display, or viewfinder. 3. Do not use soap, detergent, or other solution to clean the camera; use a clean, soft cloth only. 3 Getting to know Your Camera Camera Components Guide 1. Flash 2. Self-timer LED 3. Lens 4. Viewfinder 5. USB 6. Tripod mount 7. Flash LED 8. Shutter button 9. ON/OFF button 10. Strap bar 11. Battery/Card slot cover 12. Up button 13. Right button 14. Menu button 15. Down button 16. Flash button 17. Playback button 18. Display button 19. Left button 20. LCD screen LCD display 4 Prepare Your Camera for Use Load Batteries and Memory Card Open the battery cover and insert three of the included AAA rechargeable batteries or three new alkaline batteries according to the polarity indicated on the battery door, then insert the memory card and close the cover. When the battery power is low, an icon will appear on the screen. You will need to select what kind of battery you are using. If you use alkaline batteries, you should select 1 and the battery capacity icon will display half full indicating that you will not be able to use the flash but you will still be able to take pictures until the icon displays empty; If you are using rechargeable batteries, select 2 and the battery capacity icon will display full indicating that you can take pictures until the icon shows that the battery capacity is empty. Turning the Camera ON/OFF To turn the camera on, press the ON/OFF button for 2 to 3 seconds until the operation LED is lit. To turn off the camera, press the ON/OFF button for 2 seconds. The camera will also power off automatically after 30 seconds of inactivity if not connected to the computer via the USB cable. The auto power off time can be manually set as described in the Auto Power Off section of this manual. Camera Setup Taking Pictures and Recording Options Image Capture Pressing the menu button will enter the capture select menu. Press the UP or DOWN button to select the desired capture mode, then press menu button to confirm. 5 Color Options From the Image Capture menu, press the RIGHT button to enter the Color Options menu. Press the UP or DOWN button to select the item that you wish to adjust and the menu button to enter the selected item. Adjusting Exposure Value: Selecting the desired White Balance: Adjusting the Sharpness: Resolution Press the UP or DOWN button to select the desired resolution and press the menu button to confirm. 6 Super: 2304X1728 High: 2048X1536 Middle: 1600X1200 Low: 1280X1024 Quality Press the UP or DOWN button to select the preferred quality level and press the menu button to confirm. Auto Power-Off Time Press the DOWN button to set the Auto Power-Off Time. Set the Date...