Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Button (the There is no need to take your hands off the wheel or your symbol) eyes off the road to use the S4. Simply say the trigger phrase BlueAnt Speak To Me™ and the S4 will be ready for your voice commands. You can make outgoing calls and answer incoming calls using just your voice, and you will always know who is calling you without looking at your phone because the S4 will read out the caller’s name or number when the phone rings. Touch-Sensitive Volume Controls BlueAntBluetooth Indicator Microphone Handsfree Trigger Indicator Remove the Protective Cover The plastic cover on your S4 is intended to protect it during transit. Please remove it before using your S4. Charge Your S4 Battery Your S4 has been given an initial partial charge to get you started, but for best results we recommend you charge it using the supplied USB cable and adaptor: >You should charge the S4 whenever it announces that the battery is Very Low. >A full charge takes about 3-4 hours. >During charging, the battery indicator light turns red. >When the light goes out, the charge is complete. OFFONBlueAntIndicator Charging Port ENGLISH Pair the S4 with your Phone To use the S4 you need to pair it with your phone. 1. Slide the power switch on the side of the S4 to the ON position. 2. If this is the first time you have used the S4 it will go straight to pairing mode. The voice prompts will start to talk you through the pairing process and the light will flash blue. For subsequent pairings, say BlueAnt Speak To Me, wait for the S4 to ask you to Say A Command and then say Pair Me. 3. Follow the voice prompts to pair the S4 with your phone. The pairing code is 0000 (four zeros). Transfer your Phonebook Once the pairing is complete your S4 will attempt to transfer the contacts from your phonebook so that it can announce the names of incoming callers. Note: If your phone prompts you to allow a connection to the S4, you must select “YES” or “OK”. BlackBerry® If you are using a BlackBerry smartphone you may see a message like this one. Select “Don’t ask this again” so that a tick appears in the box, and then choose “YES”. Android™ On Android devices a message about the phonebook transfer may appear in the notifications area at the top of the screen. In order to transfer your contacts you must swipe your finger over this message and accept the phonebook transfer request from the S4. Automatic Transfer Not Supported Some phones do not support automatic phonebook transfers. If this is the case on your phone the S4 will announce that it cannot transfer the contacts automatically. See “Manually Transferring your Phonebook Contacts to the S4” on page 17 for help. Accept connection request from BlueAnt S4? YES NO .Don’t ask this again Phonebook Access Request Notification shown on Android devices ENGLISH Install the S4 in your Car 1. Slide the sun visor clip onto the edge of the car sun visor. Your S4 is supplied with a choice of visor clips so you can select the most appropriate one for your vehicle. 2. Attach the magnetic back of the S4 to the fixed sun visor clip. 1 Sun Visor Clip 2 BlueAnt Don’t forget: Drive safely and within the law. Please refer to the relevant national or local legislation regarding the usage of mobile devices while driving. Remember that driving is your first priority: please read the enclosed safety information booklet for tips on the safe use of your BlueAnt device. Using the Handsfree Trigger Your S4 is designed to be a true handsfree device. Simply say the trigger phrase BlueAnt Speak To Me and the S4 will be ready to receive your voice commands. ENGLISH BlueAntBlueAnt Speak To Me Handsfree Trigger Indicator 1 BlueAntSay A Command 2 When the S4 asks you to Say A Command, immediately say one of the voice commands loudly and clearly. Note: The handsfree trigger only works when the green handsfree trigger indicator light on the front of the device is on. This tells you that the S4 is listening for your voice. Handsfree Trigger Battery Saving Mode Using the handsfree trigger gives you true handsfree operation, as the S4 is always listening for your voice. If you want your S4 to run for longer between charges, slide the power switch to the middle position to activate “battery saving mode”. In this mode the S4 only listens for 2 minutes after the last action. Once the 2 minutes are up, the green indicator light goes out and the S4 stops listening. To re-activate the S4, tap the symbol instead of saying BlueAnt Speak To Me: OFFON BlueAnt1 BlueAntSay A Command 2 Reconnecting to the S4 To save battery, the S4 goes into “sleep mode” when you are not using it. If you take your phone out of range of the S4 for more than 2 minutes, the handsfree trigger switches off and “sleep mode” is activated. When you come back, you must tap the symbol to reconnect your phone and reactivate the trigger. Alternatively, use the power switch to turn the S4 off when you get out of the car and then turn it back on again when you come back. The S4 wil...