Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
MOUNTING THE CID You can place the CID on a flat surface, or you can mount it on a wall. Follow these steps to mount the CID on a wall. 1. Select a location near the phone line jack, then use the round holes in the mounting bracket as a template to mark the mounting screw locations on the wall. 2. Drill two 1/8-inch (3.5 mm) holes in the wall at the marked locations. 3. While holding the bracket against the wall, thread a screw (not supplied) through each hole in the bracket, then tighten the screws. 4. Align the slots on the back of the Caller ID with the holes on the bracket. Gently slide the CID downward to secure it. Preparation 15 To remove the bracket from the CID, slide the bracket down then lift and remove it. ¶ Operation INCOMING CALLS When you subscribe to Caller ID service from your phone company, the phone company sends the caller’s phone number (and name, if available) and the call’s time and date between the first and second rings. Your CID receives and displays this information for each call and updates the current date and time. You cannot manually set the date and time. VT__ 97BB97BB97BB97BB and the CALL indicator flash when you have an incoming call, and the call record appears for 20 seconds, then the number of new calls appears. aXj D;MD;MD;MD;M flashes and the NEW CALL indicator flashes to show that you have received new calls since the last time you reviewed the stored records. 16 Operation USING CALL REJECT When you receive a call you do not want to answer, press CALL REJECT. The CALL REJECT indicator lights and the CID announces “We don’t accept calls of this nature. Please remove our phone number from your calling list. Thank you.” Note: The CID displays the caller’s phone number until you delete it (see “Deleting Caller ID Records” on Page 20). MESSAGE WAITING Note: The message waiting feature does not work with stutter dial tone service. Check with your phone company for the type of service you have. If you subscribe to the telephone company’s message waiting service and have a voice-mail message waiting, aX D;D;D;D;j MMMMy VT__ 97BB97BB97BB97BB and `X C;C;C;C;f IIIIf IIIIT 7777Z ====X ;;;;yj MMMMT 7777\g ?J?J?J?J\ ????a DDDDZ ====yappear on the display. `XffTZX C;II7=;C;II7=;C;II7=;C;II7=;yjT\g\aZ M7?J?D=M7?J?D=M7?J?D=M7?J?D= remains on the display until you retrieve the message. If you are talking on the phone when a call comes in, the incoming call automatically rolls over to message waiting. The phone Operation 17 company sends the information after you end the current call and `XffTZX C;II7=;C;II7=;C;II7=;C;II7=;yjT\g\a M7?J?DM7?J?DM7?J?DM7?J?DZ ====y appears on the display. In some areas, callers can block the sending of their Caller ID information. When a caller blocks the Caller ID information, @ ####y ce FHFHFHFH\iTgX ?L7J;?L7J;?L7J;?L7J;yVT__‘ 97BB¶97BB¶97BB¶97BB¶ appears instead of the call information. REVIEWING CALL RECORDS Each time you receive a call, your CID stores a record that you can see while you are on the phone, or review later. Your CID saves up to 50 call records, replacing the oldest call record with a new call record. Each call record includes the call number (order in which the call is received), the time and date of the call, the caller’s phone number (if available), and the caller’s name (if available). To review the call records, repeatedly press REVIEW 5 8888or 9. XaW ;D:;D:;D:;D:ybY E