Stimmen - 0, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
3. Insert the supplied AC adapter’s barrel plug into the DC9V jack on the bottom of the CID-932. Plug the AC adapter into a nearby outlet that does not operate with a light switch. Note: AC power is required in order for the CID-932’s voice feature to function. Be sure to connect AC power. 14 43-932.fm Page 15 Wednesday, January 12, 2000 9:56 AM SETTING THE TIME AND DATE The time and date are automatically set when the CID-932 first receives a call. Subsequently, each incoming call automatically updates the time and date. To change the time and date follow these steps. 1. Hold down REVIEW8and9for about 6 seconds until the hour segment flashes. 2. Press REVIEW8or9to change the hour digit. 3. Press DELETE to confirm. The minute digits flash. 4. Repeat Steps 2–3 to set the minutes, day, and month. The display returns to standby and the CID-932 is ready to receive calls. 15 43-932.fm Page 16 Wednesday, January 12, 2000 9:56 AM OPERATION RECEIVING A CALL After the first ring, the CID-932 displays the caller’s telephone number (and name, if available) and the date and time of the call for about one minute, and announces the caller’s phone number (or a recorded Voice VIP message, if one has been assigned to that number). The NEW CALL indicator flashes, and the number of new and total calls appear. Note: The ringer of a connected phone does not sound while the CID-932 is making voice announcements. ADJUSTING THE VOLUME You can adjust the CID DELETE REVIEW VOICE VIP 932’s volume at any time. Repeatedly press VOLUME until the desired level (OFF, LOW, or HIGH) appears. VOLUME PLAY RECORD MODE Turning the Speaker On or Off You can also turn the CID-932’s speaker on or off by sliding SPEAKER, located on the right side, to ON or OFF. OFF ONOFF ON SPEAKER 16 43-932.fm Page 17 Wednesday, January 12, 2000 9:56 AM CALLER ID MESSAGES Display Description LONGDISTANCE Appears if your phone company sends information indicating that the incoming call is long distance. PRIVATECALL Appears when the caller has blocked the number. NOCALL There are no Caller ID records. ERROR Appears when there is an error in transmission or reception of a call. RPT # Appears when two or more calls have been received from the same number. Repeat calls do not cause the number of new or total calls to increase. CALLER UNKNOWN The call is not within a Caller ID service area. CALL FORWARD The call was forwarded to you from another number. 17 43-932.fm Page 18 Wednesday, January 12, 2000 9:56 AM REVIEWING CALLER ID RECORDS The CID-932 stores the number, name, date and time of up to 50 calls, then begins replacing the oldest call record with each new one received. You can review call records, with or without voice DELETE VOLUME PLAY RECORD REVIEW MODE VOICE VIP announcements any time the CID-932 is not receiving a call. With Voice Announcements Press PLAY. The CID-932 announces only new calls, starting with the newest. If a telephone number is on the VIP Call list, the Voice VIP message for that number plays instead of the number. After the CID-932 announces the last number (or Voice VIP message), END OF RCV appears for about 20 seconds, then the CID-932 is ready to receive new calls. Without Voice Announcements Repeatedly press REVIEW9to see the Caller ID information starting from the newest call, or REVIEW8to start from the oldest call. The CID-932 displays the number, name, and time of each call, then END OFRCV appears for about 20 seconds, then the CID-932 is ready to receive new calls. 18 43-932.fm Page 19 Wednesday, January 12, 2000 9:56 AM DELETING CALLER ID RECORDS To delete an individual call record, press DELETE twice while the number you want to delete is displayed. The deleted number disappears and the next number in the CID-932’s memory appears. VOLUME PLAY RECORD MODE DELETE REVIEW VOICE VIP To delete all call records, hold down DELETE for at least six seconds until NOCALLappears. VIP CALL LIST You can record a Voice VIP message for any telephone number in the CID-932’s memory (up to 15 messages). The CID-932 plays the message whenever you receive a call from that number. You can review, re-record, or delete Voice VIP messages any time the CID-932 is not receiving a call. Recording Voice VIP Messages 1. Repeatedly press REVIEW8or9 to scroll through the Caller ID records until the desired telephone number appears. 19 43-932.fm Page 20 Wednesday, January 12, 2000 9:56 AM 2. Press RECORD and begin speaking immediately after the beep. RECORDING appears. 3. Record your message within 2 seconds. The CID-932 immediately plays back the message, and displays the telephone number, then the message OK? PRESS RECORD appears. 4. To accept the message, press RECORD again. If you want to re-record the message, press DELETE, then repeat the recording process. If there is already a Voice VIP message for that number, the CID-932 beeps twice and ALREADY EXISTS appears. See “Reviewing and Re-recording Voice VIP Messages”. If the VIP Call List is full, the CID-932...