Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
Antenna Coupler Antenna Wire (High Voltage) Indoor Antenna Wire Lead-in Insulator (High Voltage) WARNING Do not open the equipment. Hazardous voltage which can cause electrical shock exists inside the equipment. Only qualified personnel should work inside the equipment. Immediately turn off the power at the switchboard if water leaks into the equipment or something is dropped in the equipment. Continued use of the equipment can cause fire or electrical shock. Contact a FURUNO agent for service. Do not disassemble or modify the equipment. Fire, electrical shock or serious injury can result. WARNING Do not place liquid-filled containers on the top of the equipment. Fire or electrical shock can result if a liquid spills into the equipment. Immediately turn off the power at the switchboard if the equipment is emitting smoke or fire. Continued use of the equipment can cause fire or electrical shock. Contact a FURUNO agent for service. Make sure no rain or water splash leaks into the equipment. Fire or electrical shock can result if water leaks in the equipment. Keep heater away from equipment. A heater can melt the equipment’s power cord, which can cause fire or electrical shock. Use the proper fuse. Fuse rating is shown on the equipment. Use of a wrong fuse can result in equipment damage. Do not operate the equipment with wet hands. Electrical shock can result. CAUTION A warning label is attached to the equipment. Do not remove the label. If the label is missing or illegible, contact a FURUNO agent or dealer. WARNING To avoid electrical shock, do not remove cover. No user-serviceable parts inside. Name: Warning Label (1) Type: 86-003-1011-0 Code No.: 100-236-230 i TABLE OF CONTENTS INTRODUCTION.............................................................................................................iii 1. OPERATION 1.1 System Configuration.................................................................................................1-1 1.2 Transceiver Unit Description .....................................................................................1-2 1.3 Turning the Power On/Off..........................................................................................1-4 1.4 Adjusting the Backlighting.........................................................................................1-4 1.5 Turning the Loudspeaker On/Off ...............................................................................1-4 1.6 Turning the Squelch On/Off.......................................................................................1-4 1.7 Selecting Class of Emission, Turning AGC On/Off...................................................1-4 1.8 Selecting Frequency ...................................................................................................1-5 1.9 Displaying Station Name .........................................................................................1-10 1.10 Transmitting ...........................................................................................................1-10 1.11 Distress Call on 2182 kHz ...................................................................................... 1-11 1.12 Receiving................................................................................................................1-13 1.13 Frequency Scan ......................................................................................................1-15 1.14 Frequency Sweep ...................................................................................................1-17 1.15 MIF Commands .....................................................................................................1-18 2. OPERATION OF OPTIONAL EQUIPMENT 2.1 Telex Communication ................................................................................................2-1 2.2 Remote Station RB-500 .............................................................................................2-2 2.3 Intercom .....................................................................................................................2-2 3. CHANGING SYSTEM SETTINGS 3.1 System Setup..............................................................................................................3-1 3.2 Customizing by User..................................................................................................3-1 3.3 Writing User Channels ...............................................................................................3-3 4. MAINTENANCE 4.1 Weekly Checks ...........................................................................................................4-1 4.2 Diagnostic Test ...........................................................................................................4-2 4.3 LCD/Keyboard Test & ROM Version No. Confirmation...........................................4-3 4.4 Maintenance ..................................................................................................