Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: HP
Dateigröße: 906.15 kb
Dateiname:
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Document Outline
- Contents
- Configuration Information
- Install Matrix Server and MxFS- Linux
- Supported Operating Systems and Kernels
- Contents of the Distribution
- Installation Procedure
- Installation Checklist
- 1. Set Up the SAN Environment
- 2. Install a Supported Operating System
- 3. Install Third-Party MPIO Software (Optional)
- 4. Verify Downloaded RPMs
- 5. Install a Binary Kernel (RHEL4 Only)
- 6. Install the iSCSI Initiator (iSCSI Configurations Only)
- 7. Install Matrix Server
- 8. Install MxFS-Linux (File Serving Utility Only)
- 9. Install the Quota Tools RPM (Optional)
- 10. Specify an HBA Driver If Necessary
- 11. Reboot and Verify the HBA Configuration
- 12. Verify the SAN Configuration
- 13. Verify the Patched Kernel for MxFS-Linux
- 14. Run the mxcheck Utility
- 15. Set Matrix Server Parameter for FalconStor
- 16. Install Hardware Snapshot Software (Optional)
- 17. Configure the Matrix
- Test the Fencing Configuration
- Install the Management Console on Other Hosts
- Administer init.d Scripts
- MxFS-Linux and NFS File Locking
- Uninstall PolyServe Matrix Server
- Uninstall the Management Console
- Uninstall MxFS-Linux
- Workaround for SELinux (RHEL4 Only)
- Install the RHEL4 Operating System
- Install the SLES9 Operating System and Kernel
- Build a RHEL4 Kernel from PolyServe Sources
- Build a RHEL4 Kernel from Non- PolyServe Sources
- Configure the Matrix from the Command Line
- Run mxconfig
- Matrix Server License File
- Specify the Matrix Password
- Specify the Network Authentication Secret Password
- Select the Cluster Administrative Traffic Protocol
- Select a Fencing Method
- Configure FibreChannel Switches
- Set the SNMP Community String
- Modify Disk Partitioning for Membership Partitions
- Create Membership Partitions
- Add a Snapshot Configuration
- Export the Configuration
- Verify the Fencing Configuration
- Complete the Installation
- Run mxconfig