Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Software - Microsoft Windows Server 2012 (419.13 kb)
Software - Microsoft Windows Server 2012 (1.12 mb)
Software - Microsoft Windows Server 2012 (1008.04 kb)
Anleitung Zusammenfassung
Pre-installation tasks
To prepare for installation, ensure that you complete the following tasks:
• Make sure that your server meets the recommendations for Windows Server 2012 Foundation:
– Select a server from the recommended system platforms listed in the “Supported ProLiant servers” section.
– Make sure that the server has a DVD drive (either installed or attached to the server receiving the installation). Note
that you need a license key to use iLO virtual media with HP ProLiant ML or DL servers.
• Make sure that your server is completely configured and up-to-date. If necessary, complete the following:
– Update the ROM to the required version. You can download ROM updates from the HP SPP, which is available at
www.hp.com/go/spp/download or the HP Support Center at www.hp.com/go/support.
– Use the HP ROM-Based Setup Utility (RBSU) to configure the server hardware, set the date and time appropriately,
and configure the boot controller order if necessary. To access the RBSU, press the F9 key from the main boot
screen. For instructions on using the RBSU, see HP ROM-Based Setup Utility User Guide at
www.hp.com/support/rbsu.
– Update iLO firmware to the latest version. To download the latest iLO firmware, see the HP Support Center at
www.hp.com/go/support.
– Update your server using the HP Service Pack for ProLiant (HP SPP) 2012.10.0 (or later). For instructions, see the
”Installing components from the HP SPP” section.
Installing the Windows Server 2012 Foundation OS
These following sections provide instructions for installing Windows Server2012 Foundation on ProLiant servers.
ProLiant Gen8 servers
Use HP Intelligent Provisioning 1.30 (or later) to install Windows Server 2012 Foundation onto a ProLiant Gen8 server.
Although you can use the Windows Server 2012 Foundation media to install the OS onto any supported ProLiant server,
we recommend using Intelligent Provisioning to install Windows Server 2012 Foundation onto ProLiant Gen8 servers.
Using Intelligent Provisioning ensures that your server will have the latest HP firmware, drivers, and software.
For additional information on Intelligent Provisioning, see the Intelligent Provisioning Release Notes. To understand the
OS support available for ProLiant servers, see the Intelligent Provisioning Server Support Guide. Both of these
documents are available on the Intelligent Provisioning Information Library.
Note
While Intelligent Provisioning provides an assisted installation for a single
server, HP Insight Control server deployment is the licensed solution for mass
deployment and automated installs. Insight Control 7.1.2 adds the capability for
Windows Server 2012 Foundation deployment.
To install the OS and the required software and firmware, use the following steps in conjunction with the Intelligent
Provisioning User Guide. The Intelligent Provisioning User Guide provides screen shots and specific steps and guidelines
for the installation.
1. Boot the server, and press the F10 key during POST. If you want to check the HP IP version, click the System
Information button on the Intelligent Provisioning screen.
2. Select Configure and Install.
3. Configure hardware settings as necessary for your server.
4. Select the OS you want to install to be Windows Server 2012 Foundation.
5. Choose the type of installation to be Custom, Manual, or Default installation.
6. Follow the on screen instructions to complete the installation.
4
...